Menu principale

DAP-1330: Range Extender Wi-Fi N 300

Aperto da Pondera, 19 Dicembre 2016, 09:50:28

Pondera

D-Link DAP-1330
ripetitore senza fili 802.11n a 300 Mbps su 2,4 GHz


DAP-1330 A1 (Qualcomm Atheros QCA9533)


Particolarità
Extend Your High-Speed Wireless Network
Extend your home wireless coverage and enjoy wireless connection speeds of up to 300 Mbps with Wireless N technology¹

Flexible and Versatile
The built-in Ethernet port lets you give a wired device the ability to connect wirelessly, or add wireless to an existing wired network

Easy to Set Up
Just plug it in within range of your wireless network, then push a button on it and your router and you're done; no messy configuration required


Caratteristiche
Connectivity
• Wireless N gives you high-speed wireless connectivity for your devices
• Wireless 802.11g/b backward compatibility
• Wireless speeds of up to 300 Mbps1
• 10/100 Fast Ethernet Port

Security
• WPA2/WPA wireless encryption to keep your wireless connection secure
• Wi-Fi Protected Setup (WPS) for secure setup with the simple press of a button

Easy to Use
• One-piece wall plug design is compact, portable, and does not require additional power cables
• Built-in setup wizard and QRS Mobile app for mobile devices guide you through installation

Panoramica
The DAP-1330 N300 Wi-Fi Range Extender is a portable plug-in repeater that lets you extend an existing wireless network. Simply place it anywhere in your home to extend the range of your wireless network. Supporting Wireless N, this tiny yet powerful N300 Wi-Fi Range Extender gives you connection speeds of up to 300 Mbps, while still being backwards compatible with your existing wireless devices.

Extend Your Wireless Network
Increase the coverage of your home wireless network with the sleek and easy-to-use DAP-1330 N300 Wi-Fi Range Extender. N300 technology helps to extend wireless range in your home or office and also provides backward compatibility with older wireless devices in your network, allowing you to enjoy a fast, reliable wireless connection. Alternatively, use the built-in Fast Ethernet port and your home's existing wired Ethernet cabling to extend wireless
coverage without worrying about signal strength.

Easy to Set Up, Easy to Use
Setting up the N300 Wi-Fi Range Extender is simple. Just use the one-touch configuration function by pushing the WPS push-button on the DAP-1330 and on the router or AP you want to extend, and the DAP-1330 will automatically configure itself for you. Alternatively, you can use the supported QRS Mobile app on your iPhone, iPad, or iPod touch, or Android mobile device to set up the DAP-1330 easily without needing a computer. The N300 Wi-Fi Range Extender even includes a built-in setup wizard that lets you configure it both wired and wirelessly with a PC or mobile device.

Compact, Convenient Design
The DAP-1330's compact design and intuitive setup makes it perfect for use at home or in a small office. Simply plug it in and use the bright signal indicator LED to find the best location to extend your network. Its diminutive wall-plug design saves you the hassle of dealing with a power cord and its sleek, unobtrusive appearance blends easily into the decor of any home or office.

Specifiche
General
Device Interfaces
• 802.11n/g/b Wireless LAN
• 10/100 Fast Ethernet Port
• Reset Button
• WPS Button

LEDs
• Status/WPS
• 3 segment Wi-Fi signal strength indicator

Standards
• IEEE 802.11n
• IEEE 802.11g
• IEEE 802.11b
• IEEE 802.3u

Antennas
• Two external antennas

Data Signal Rate
• 2.4 GHz
• Up to 300 Mbps¹

Plug Type
• Region dependent

Functionality
Wireless Security
• Wi-Fi Protected Access (WPA/WPA2)
• WPS (PBC)

Advanced Features
• D-Link One-Touch Extender Setup

Device Management
• Supports QRS Mobile app for iPhone, iPad, iPod touch, and Android mobile devices
• Web UI

Physical
Dimensions
• 77 x 55.5 x 34 mm (3.03 x 2.28 x 1.33 inches)²

Weight
• 98 grams (3.47 ounces)

Power
• Input: 110 to 240 V AC, 50/60 Hz

Temperature
• Operating: 0 to 40 °C (32 to 104 °F)
• Storage: -20 to 65 °C (-4 to 149 °F)

Humidity
• Operating: 10% to 90% non-condensing
• Storage: 5% to 95% non-condensing

Certifications
• FCC
• IC
• CE³
• CB
• Wi-Fi Certified
• C-Tick

Order Information
Part Number
DAP-1330

Description
N300 Wi-Fi Range Extender

¹ Maximum wireless signal rate derived from the IEEE Standard 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, may lower actual data throughput rate. Environmental factors will adversely affect wireless signal range.
² Dimensions do not include the regional plug type.
³ For the EU region, this product is compliant with CE regulations and operates within the following frequency range: 2.4 - 2.4835 GHz.

D-Link Corporation Datasheet updated 06/22/16.


Documentazione
Scheda tecnica
Guida installazione
Manuale utente

Firmware
DAP-1330 A1 1.13_BETA build 01 20200117 con nota edizione
DAP-1330 A1 1.10 build 01 20180330 con nota edizione cumulativa
DAP-1330 A1 1.01 build 04 20170717 con nota edizione cumulativa
DAP-1330 A1 1.00 build 21 20151106 con nota edizione cumulativa

Supporto internazionale D-Link
Pagina prodotto: Italia, Brasile
Sito FTP: Europa, Germania, USA, Canada, Australia
Supporto Tecnico: Taiwan TSD

Pondera

#1
Documentazione multimediale
Immagini
FCC ID

Video
Cerca con Google

Pondera

Pubblicato firmware DAP-1330 A1 1.00 Build 21 20151106.


Project Name: DAP-1330
HW version: A1
Region/OEM code: Default
WLAN Domain: US/NA / FCC
Channel List:
 2.4GHz: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11
Firmware Query URL: http://wrpd.dlink.com/router/firmware/query.aspx?model= DAP-1330_Ax_Default
Flash size: 8MB
DRAM size: 64MB
=======================================================================
Firmware: v1.00 Build: 21
Hardware: A1
Date: Nov, 6, 2015

Firmware External Version: V1.00
Firmware Internal Version: V1.00b21
Date: Fri, 6 Nov 2015
Kernel: 2.6.31, B0015, Date=Thu, 15 Oct, 2015
Apps: 1.1, B0139, Date=Fri, 6 Nov, 2015
WLAN Driver: AR9531, 10.2-00082-4, B0020, Date=Fri, 23 Oct, 2015
Checksum: 0x06610A76

Problems Resolved:
1. Fixed the Save button did not work when users clicked on it

Enhancements:

=======================================================================

Firmware: v1.00 Build: 20
Hardware: A1
Date: Nov, 5, 2015

Firmware External Version: V1.00
Firmware Internal Version: V1.00b20
Date: Thu, 5 Nov 2015
Kernel: 2.6.31, B0015, Date=Thu, 15 Oct, 2015
Apps: 1.1, B0138, Date=Thu, 5 Nov, 2015
WLAN Driver: AR9531, 10.2-00082-4, B0020, Date=Fri, 23 Oct, 2015
Checksum: 0x06622021

Problems Resolved:
1. Fixed unable to display GUI when the browser was German
2. Fixed users could access version.txt without Admin login

Enhancements:

=======================================================================

Firmware: v1.00 Build: 19
Hardware: A1
Date: Oct, 27, 2015

Firmware External Version: V1.00
Firmware Internal Version: V1.00b19
Date: Tue, 27 Oct 2015
Kernel: 2.6.31, B0015, Date=Thu, 15 Oct, 2015
Apps: 1.1, B0137, Date=Tue, 27 Oct, 2015
WLAN Driver: AR9531, 10.2-00082-4, B0020, Date=Fri, 23 Oct, 2015
Checksum: 0x06617720

Problems Resolved:
1. Fixed WPS did not work when the security of extended wifi was none.
2. Fixed unable to run WPS on Wizard when DUT was set to the Ethernet mode
3. Fixed unable to upgrade firmware and configuration file on Safari
4. Fixed unable to disable the extended wifi
5. Fixed displaying duplicating client information on the Connected Clients list

Enhancements:

=======================================================================

Firmware: v1.00 Build: 18
Hardware: A1
Date: Oct, 24, 2015

Firmware External Version: V1.00
Firmware Internal Version: V1.00b18
Date: Sat, 24 Oct 2015
Kernel: 2.6.31, B0015, Date=Thu, 15 Oct, 2015
Apps: 1.1, B0135, Date=Fri, 23 Oct, 2015
WLAN Driver: AR9531, 10.2-00082-4, B0020, Date=Fri, 23 Oct, 2015
Checksum: 0x0661E3A1

Problems Resolved:
1. Fixed WPS did not work when the security of Extended WiFi was none.
2. Fixed the HT20/40 Coexistence did not work
3. Fixed unable to display the client information when the client's mac address was not in IEEE's mac list
4. Fixed unable to complete the Setup Wizard when running WPS with an uplink device which channel was not as same as DUT's current channel
5. Fixed sometimes unable to find DUT's SSID after configuring the Network Settings

Enhancements:

=======================================================================

Firmware: v1.00 Build: 17
Hardware: A1
Date: Oct, 18, 2015

Firmware External Version: V1.00
Firmware Internal Version: V1.00b17
Date: Sun, 18 Oct 2015
Kernel: 2.6.31, B0015, Date=Thu, 15 Oct, 2015
Apps: 1.1, B0134, Date=Fri, 16 Oct, 2015
WLAN Driver: AR9531, 10.2-00082-4, B0019, Date=Sat, 17 Oct, 2015
Checksum: 0x0661B7C4

Problems Resolved:
1. Fixed DUT was unable to connect to router whose channel was greater than channel 6

Enhancements:

=======================================================================

Firmware: v1.00 Build: 16
Hardware: A1
Date: Oct, 16, 2015

Firmware External Version: V1.00
Firmware Internal Version: V1.00b16
Date: Fri, 16 Oct 2015
Kernel: 2.6.31, B0015, Date=Thu, 15 Oct, 2015
Apps: 1.1, B0134, Date=Fri, 16 Oct, 2015
WLAN Driver: AR9531, 10.2-00082-4, B0018, Date=Fri, 16 Oct, 2015
Checksum: 0x06611D2A

Problems Resolved:
1. Removed the proxy station function
2. Fixed the tx power was limited by wireless driver in AU domain

Enhancements:
=======================================================================

Firmware: v1.00 Build: 15
Hardware: A1
Date: Oct, 14, 2015

Firmware External Version: V1.00
Firmware Internal Version: V1.00b15
Date: Wed, 14 Oct 2015
Kernel: 2.6.31, B0014, Date=Tue, 01 Sep, 2015
Apps: 1.1, B0131, Date=Wed, 14 Oct, 2015
WLAN Driver: AR9531, 10.2-00082-4, B0016, Date=Wed, 14 Oct, 2015
Checksum: 0x0663B1BB

Problems Resolved:
1. Fixed TX packet of WiFi and Extended WiFi were always zero
2. Fixed wireless clients were unable to obtain IP address after the wireless clients had been disconnected from DUT and reconnected back to DUT a few times
3. Fixed DUT rebooted automatically in heavy traffic
4. Fixed the IPv6 DNS addresses would be removed when DUT renewed its IPv4 address
5. Supported Malaysia and India in D-Link Wi-FI frequency table

Enhancements:
=======================================================================

Firmware: v1.00 Build: 14
Hardware: A1
Date: Oct, 1, 2015

Firmware External Version: V1.00
Firmware Internal Version: V1.00b14
Date: Thu, 1 Oct 2015
Kernel: 2.6.31, B0014, Date=Tue, 01 Sep, 2015
Apps: 1.1, B0127, Date=Thu, 1 Oct, 2015
WLAN Driver: AR9531, 10.2-00082-4, B0015, Date=Mon, 21 Sep, 2015
Checksum: 0x06631110

Problems Resolved:
1. Fixed the dhcp server did not be terminated when DUT in factory default was connected to router by Ethernet and then rebooted router
2. Fixed incorrect WPS led behavior when DUT in factory default was connected to router by Ethernet and pushed the WPS button and then waited for time out
3. Changed the WPS behavior. When DUT in factory default was connected to router by Ethernet, user pushed the WPS button and only AP's WPS would be executed

Enhancements:
=======================================================================

Firmware: v1.00 Build: 13
Hardware: A1
Date: Sep, 24, 2015

Firmware External Version: V1.00
Firmware Internal Version: V1.00b13
Date: Thu, 24 Sep 2015
Kernel: 2.6.31, B0014, Date=Tue, 01 Sep, 2015
Apps: 1.1, B0126, Date=Thu, 24 Sep, 2015
WLAN Driver: AR9531, 10.2-00082-4, B0015, Date=Mon, 21 Sep, 2015
Checksum: 0x066244E3

Problems Resolved:
1. Fixed the WPS page on Wizard was broken on IE 9
2. Fixed after the uplink router changed IPv6 mode, DUT would not be able to obtain IPv6 DNS address
3. Fixed unable to access DUT when DUT was in AP mode and it did not obtain any IP address in three minutes

Enhancements:
=======================================================================

Firmware: v1.00 Build: 12
Hardware: A1
Date: Sep, 22, 2015

Firmware External Version: V1.00
Firmware Internal Version: V1.00b12
Date: Tue, 22 Sep 2015
Kernel: 2.6.31, B0014, Date=Tue, 01 Sep, 2015
Apps: 1.1, B0124, Date=Tue, 22 Sep, 2015
WLAN Driver: AR9531, 10.2-00082-4, B0015, Date=Mon, 21 Sep, 2015
Checksum: 0x0662C84A

Problems Resolved:
1. Fixed the WPS page on Wizard was broken on IE 11
2. Fixed the new firmware notification did not display correctly on IE 9
3. Fixed DUT's uplink wireless disconnected from an uplink router after doing WPS for DUT's extended wireless
4. Fixed IPv6 Autoconfiguration did not work properly when Router's RA set M bit to 1 and O bit to 1
5. Fixed unable to configure DUT by QRS iOS app

Enhancements:
=======================================================================

Firmware: v1.00 Build: 11
Hardware: A1
Date: Sep, 14, 2015

Firmware External Version: V1.00
Firmware Internal Version: V1.00b11
Date: Mon, 14 Sep 2015
Kernel: 2.6.31, B0014, Date=Tue, 01 Sep, 2015
Apps: 1.1, B0121, Date=Mon, 14 Sep, 2015
WLAN Driver: AR9531, 10.2-00082-4, B0014, Date=Mon, 14 Sep, 2015
Checksum: 0x0662C5E6

Problems Resolved:
1. Fixed unable to display GUI on Chrome
2. Fixed Intel cards IOT issue
3. Fixed displaying incorrect wireless mac address in version.txt

Enhancements:
=======================================================================

Firmware: v1.00 Build: 10
Hardware: A1
Date: Sep, 9, 2015

Firmware External Version: V1.00
Firmware Internal Version: V1.00b10
Date: Wed, 9 Sep 2015
Kernel: 2.6.31, B0014, Date=Tue, 01 Sep, 2015
Apps: 1.1, B0120, Date=Wed, 9 Sep, 2015
WLAN Driver: AR9531, 10.2-00082-4, B0013, Date=Wed, 9 Sep, 2015
Checksum: 0x066297F2

Problems Resolved:
1. Fixed DUT in Ethernet mode was unable to obtain an IP address from a uplink router after the uplink router rebooted
2. Fixed unable to configure Static IPv6
3. Removed Device Name temporary from Connected Client information
4. Fixed QRS app could not detect DUT when the extender's SSID contained special characters.
5. Fixed when user was configuring DUT by Wizard and then pressed the WPS button, the Status LED would change from the green color to the flushing orange color
6. Fixed the IPv6 Connection Type selection was overlapping the radio button below on the Network page
7. Fixed after changing the language on Wizard, Wizard would be closed when DUT was configured
8. Fixed unable to access DUT's GUI by IE 9
9. Fixed when user set a long key for the extended network on Wizard, the key would display out of Wizard
10. Removed the WEP function

Enhancements:
=======================================================================

Firmware: v1.00 Build: 09
Hardware: A1
Date: Sep, 3, 2015

Firmware External Version: V1.00
Firmware Internal Version: V1.00b09
Date: Thu, 3 Sep 2015
Kernel: 2.6.31, B0014, Date=Tue, 01 Sep, 2015
Apps: 1.1, B0118, Date=Thu, 03 Sep, 2015
WLAN Driver: AR9531, 10.2-00082-4, B0011, Date=Wed, 25 Aug, 2015
Checksum: 0x06638450

Problems Resolved:
1. Fixed unable to use IPv6 address to access GUI
2. Fixed switching language to French and Português did not correctly
3. Fixed the language selection did not be selected correctly
4. Fixed unable to connect DIR-822 by WEP mode
5. Fixed unable to clear Lan's Statistics when no Ethernet cable was plugged into DUT

Enhancements:
=======================================================================

Firmware: v1.00 Build: 08
Hardware: A1
Date: Aug, 24, 2015

Firmware External Version: V1.00
Firmware Internal Version: V1.00b08
Date: Mon, 24 Aug 2015
Kernel: 2.6.31, B0013, Date=Fri, 17 Jul, 2015
Apps: 1.1, B0113, Date=Mon, 24 Aug, 2015
WLAN Driver: AR9531, 10.2-00082-4, B0010, Date=Fri, 3 Jul, 2015
Checksum: 0x06639101

Problems Resolved:
1. Fixed wireless client was unable to reach an uplink router through DUT when DUT was in WiFi mode
2. Fixed Statistics displayed incorrectly between WiFi and Extended WiFi
3. Fixed wireless client was unable to obtain an IP address from an uplink router when DUT was in Ethernet mode
4. Fixed IPv6 did not work and DUT was unable to display IPv6 information on the Home page
5. Fixed when user clicked on the left side of "Restore Configuration From File" button on the System page, DUT did not have any response.
6. Fixed when user clicked on the left side of "Upload" button on the Upgrade page, DUT did not have any response.
7. Fixed restored configuration failed by using IE 10
8. Fixed WPS did not work after retrying WPS a couple times in Wizard
9. Fixed when DUT was in Ethernet mode and doing WPS failed, the Status LED did not display correctly
10. Fixed after changing DUT's network connection type from dynamic to static, user could not access DUT anymore.
11. Fixed clicked on the Home menu, DUT did not go to the Home page
12. Fixed user was unable to complete Wizard when the wireless security of uplink device was WEP.
13. Fixed user was unable to complete Wizard when the wireless security of uplink device was None.
14. Fixed the security of the Extended WiFi became None when the wireless security of uplink device was none after completing Wizard
15. Fixed displaying client information was messed on the Home page
16. Fixed missing IP address of client information on the Home page
17. Fixed user was able to enter an invalid device name
18. Fixed when changing Device Name, the management link of mDNS did not change
19. Allowed user to use an IP address to access DUT

Enhancements:
=======================================================================

Firmware: v1.00 Build: 07
Hardware: A1
Date: Aug, 17, 2015

Firmware External Version: V1.00
Firmware Internal Version: V1.00b07
Date: Mon, 17 Aug 2015
Kernel: 2.6.31, B0013, Date=Fri, 17 Jul, 2015
Apps: 1.1, B0110, Date=Mon, 17 Aug, 2015
WLAN Driver: AR9531, 10.2-00082-4, B0010, Date=Fri, 3 Jul, 2015
Checksum: 0x0662D238

Problems Resolved:
1. Supported Traditional Chinese, Simplified Chinese, France, Italian, Portuguese, and Russian
2. Supported Channel, Channel Width, and HT20/40 coexistence on Extender
3. Used 2.4GHz Regulatory Domain instead of 802.11d Country code for MP
4. Used the positive value of rssi to calculate wireless signal strength
5. Fixed OPTIONS method did not be disabled for Security issue
6. Changed dap.local to dlinkap.local

Enhancements:

=======================================================================


Firmware: v1.00 Build: 06
Hardware: A1
Date: Jul, 30, 2015

Firmware External Version: V1.00
Firmware Internal Version: V1.00b06
Date: Thu, 30 Jul 2015
Kernel: 2.6.31, B0013, Date=Fri, 17 Jul, 2015
Apps: 1.1, B0105, Date=Thu, 30 Jul, 2015
WLAN Driver: AR9531, 10.2-00082-4, B0010, Date=Fri, 3 Jul, 2015
Checksum: 0x0663A808

Problems Resolved:
1. Fixed DUT could not display correct settings on Network page.
2. Supported Germany(de) and Spain(es)

Enhancements:

=======================================================================

Firmware: v1.00 Build: 05
Hardware: A1
Date: Jul, 29, 2015

Firmware External Version: V1.00
Firmware Internal Version: V1.00b05
Date: Wed, 29 Jul 2015
Kernel: 2.6.31, B0013, Date=Fri, 17 Jul, 2015
Apps: 1.1, B0103, Date=Wed, 29 Jul, 2015
WLAN Driver: AR9531, 10.2-00082-4, B0010, Date=Fri, 3 Jul, 2015
Checksum: 0x066332EA

Problems Resolved:
1. Supported 802.11d UK region for MP
2. Supported Extend an existing wireless network and Add wireless to your wired network on Wizard
3. Supported changing language
4. Fixed unable to access DUT from wireless after using mfc wlan24 to bring up AP
5. Fixed displaying null for Extender WiFi password on Extender page
6. Fixed displaying "Wi-Fi Password" instead of "Device Admin Password" on the Finish page of Wizard
7. Fixed the device information was too close the D-Link logo on Chrome
8. Fixed SSID could be all space
9. Fixed unable to display GUI on IE 11
10. Fixed unable to disable Extended Wi-Fi
11. Fixed after changing Wi-Fi security to WPA Personal, DUT still showed WEP
12. Fixed DUT did not work properly after changing Existing Network from Ethernet to Wi-Fi
13. Fixed the web server allowed OPTIONS method
14. Disabled 802.11d in beacon
15. Fixed IPv4 Syn Flood DoS
16. Fixed DUT did not handle error check for IPv4 network settings
17. Fixed DUT did not handle error check for WEP
18. Fixed the WPS led did not work properly when user pushed the WPS button in Wi-Fi mode
19. Fixed unable to scan AP whose security was WEP
20. Fixed check new firmware did not work

Enhancements:

=======================================================================


Firmware: v1.00 Build: 04
Hardware: A1
Date: Jul, 17, 2015

Firmware External Version: V1.00
Firmware Internal Version: V1.00b04
Date: Fri, 17 Jul 2015
Kernel: 2.6.31, B0013, Date=Fri, 17 Jul, 2015
Apps: 1.1, B0100, Date=Fri, 17 Jul, 2015
WLAN Driver: AR9531, 10.2-00082-4, B0010, Date=Fri, 3 Jul, 2015
Checksum: 0x065F154F

Problems Resolved:
1. Fixed QRS iOS app did not work
2. Fixed the Management Link was able to input none-ASCII code and special characters
3. Fixed unable to access DUT by telnet when DUT was in mp mode
4. Fixed the wireless signal led would be turned on even though DUT did not connect to an uplink router by wireless.
5. Fixed SSID was able to input none-ASCII characters
6. Supported new Home GUI except IPv6 information
7. Supported new Wizard GUI except Multiple Language, Extend an existing wireless network and Add wireless to your wired network

Enhancements:

=======================================================================

Firmware: v1.00 Build: 03
Hardware: A1
Date: Jul, 3, 2015

Firmware External Version: V1.00
Firmware Internal Version: V1.00b03
Date: Fri, 3 Jul 2015
Kernel: 2.6.31, B0012, Date=Fri, 3 Jul, 2015
Apps: 1.1, B0099, Date=Fri, 3 Jul, 2015
WLAN Driver: AR9531, 10.2-00082-4, B0010, Date=Fri, 3 Jul, 2015
Checksum: 0x06618219

Problems Resolved:
1. Fixed confusing number zero and character o in Captcha
2. Fixed messed client list
3. Fixed upgrading configuration file fail
4. Fixed wireless region did not match D-Link Wi-FI frequency table_20150528
5. Fixed client's vendor name always showed unknown
6. Fixed the unit of Connection Up Time did not be consistent
7. Fixed WPS did not work in AP mode when an Ethernet cable was presented
8. Fixed when enabling Captcha only, the admin password would be changed too.
9. Fixed site survey did not work
10. Supported mfc mode to obtain the current MP mode
11. Supported configurable existing network


Enhancements:

=======================================================================

Firmware: v1.00 Build: 02
Hardware: A1
Date: Jun, 24, 2015

Firmware External Version: V1.00
Firmware Internal Version: V1.00b02
Date: Wed, 24 Jun 2015
Kernel: 2.6.31, B0010, Date=Mon, 22 Jun, 2015
Apps: 1.1, B0095, Date=Wed, 24 Jun, 2015
WLAN Driver: AR9531, 10.2-00082-4, B0009, Date=Mon, 22 Jun, 2015
Checksum: 0x065ED991

Problems Resolved:
1. Supported mfc wlan24 command
2. Supported enabling telnet server since DUT booted up and disable it in one minute if no one accessed DUT by telnet
3. Supported wireless signal led
4. Fixed allowing users to enter full width characters in the Admin Password field.
5. Displayed asterisk in the Admin Password field
6. Fixed unable to save the configuration file from DUT
7. Fixed un-authentication for EULA.html
8. Fixed local firmware upgrade did not work

Enhancements:

=======================================================================

Firmware: v1.00 Build: 01
Hardware: A1
Date: Jun, 12, 2015

Firmware External Version: V1.00
Firmware Internal Version: V1.00b01
Date: Fri, 12 Jun 2014
Kernel: 2.6.31, B0009, Date=Tue, 2 Jun, 2015
Apps: 1.1, B0087, Date=Fri, 12 Jun, 2015
WLAN Driver: AR9531, 10.2-00082-4, B0008, Date=Wed, 29 Apr, 2015
Checksum: 0x065F1741

Problems Resolved:
1. First release

Enhancements:
1. Uncompleted functions
a. IPv6
b. Setup Wizard
c. Multiple language
d. Wireless strength led
2. Supported specifications
a. D-Link AP and Router Default Wi-Fi Name and Password Specification v1.05
b. D-Link Extender Specification v1.01-20141204
c. D-Link New HNAP Authentication and Password Encryption_V1.5
d. D-Link Router Firmware Version Query and Download Spec v1.14
e. D-Link Wi-FI frequency table_20150105
f. Specification of D-Link AP and Router Reset and Recovery Mode v1.02
g. D-Link HNAP Extension - 20141215v1.32(router commands are not supported)
h. D-Link AP and Router HiddenPage Guidelines v1 07
i. DAP-1330 Manufacturing Test Plan and Instruction Overview v1.02 20150610(wlan24 is not supported)

MadLink

Buongiorno Pondera,

ho già posto un quesito simile in un'altra discussione, ma vorrei una conferma.
Ho intenzione di cambiare il Provider dei servizi da Infostrada a Tre con solo internet WiFi tramite una cosiddetta "saponetta".
Il problema resta la rete cablata per cui devo passare da WiFi a Lan; il disegno riportato in questo articolo di presentazione mostra un solo pc collegato alla porta ethernet, al suo posto si può collegare uno switch per più pc?
Se funziona questo è il mio prossimo acquisto.

Un saluto, ML

Pondera

Citazione di: MadLink il 18 Maggio 2017, 23:33:22Ho intenzione di cambiare il Provider dei servizi da Infostrada a Tre

Presumo tu intenda da linea fissa a mobile. Per esperienza personale nella mia zona (piccoli/medi centri abitati in pianura), Tre è un ottimo operatore riguardo offerte e servizio clienti ma pecca sulla copertura. Arriva il 4G/LTE (Vodafone da qualche giorno ha attivato LTE+) ma negli orari di punta la navigazione è impossibile. Anche la fusione con Wind, e passaggio del roaming iniziato in questo periodo, non è che sia meglio dato che ci sono alcune zone dove Wind è ancora in 3G.
Quindi controlla bene la copertura nella tua zona.

Citazione di: MadLink il 18 Maggio 2017, 23:33:22con solo internet WiFi tramite una cosiddetta "saponetta"

Il DWR-932 D1 ha un'ottima ricezione, una batteria durevole ed ultimamente è sceso a prezzi interessanti.

Citazione di: MadLink il 18 Maggio 2017, 23:33:22Il problema resta la rete cablata per cui devo passare da WiFi a Lan; il disegno riportato in questo articolo di presentazione mostra un solo pc collegato alla porta ethernet, al suo posto si può collegare uno switch per più pc?

Se ti riferisci allo Scenario 1 allora si può fare, certo!


MadLink

Buongiorno Pondera,

sì mi riferisco proprio allo scenario 1 e penso che sarà la soluzione che adotterò.
Riguardo al segnale ed alla velocità, prima di decidere, ho fatto diverse misurazioni tramite il cellulare con mio-ip ed eolo ed ho sempre rilevato più di 30Mb down e più di 15Mb up (con 4/5 tacche su 6 in casa) per la rete 3 WiFi contro i 6/0.6Mb massimi di Infostrada wired; il tutto al costo di 10€ (per 30GB con notte illimitata) contro i 35€ al mese.

Grazie, un saluto ancora, ML.

Pondera

Dovrebbe essere l'offerta Casa3: ma non erano 15€? Che saponetta hai scelto?

MadLink

Buongiorno Pondera,

l'offerta è Casa 3, c'è una versione in Promozione a 10€ con "saponette" o WEBCube 4 per 30GB mensili.
In attesa di completare il passaggio a 3 ho fatto un esperimento per la conversione da WiFi ad ethernet: ho utilizzato provvisoriamente un access point Skylink (di Sky) collegando a valle uno swith 3Com Gigabit. Funziona perfettamente e i 3 miei Pc collegati in rete hanno ricevuto regolarmente l'IP dal DSL-3682.
Presumo quindi che funzioni anche con questo access point!

ML.

Pondera

Beh, se hai già un AP ed hai verificato pure che va bene con tutti gli altri dispositivi e soddisfa le tue esigenze allora non vale la pena prenderne un altro. :D

GIORGIA86

Ciao a tutti.
Ho un amplificatore DAP 1330 acquistato qualche mese fa che ha sempre funzionato correttamente fino alla scorsa settimana. Mi hanno sostituito la vecchia centralina Fastweb con un FASTgate TG789vac Xtream 35b e da quel momento il D-Link non ha più funzionato, o meglio: risulta connesso al modem ma quando vado a tentare l'accesso a internet tramite la rete estesa che crea (estensione EXT) mi dice "impossibile connettersi a questa rete". Le luci verdi del segnale sono accese ma niente accesso con nessun dispositivo.. Ho chiamato Fastweb per sapere se poteva dipendere dal modem ma mi hanno risposto che loro con questa cosa non c'entrano niente e che gli risulta collegato il D-Link. Come posso risolvere?

Pondera

Hai configurato daccapo il tuo DAP-1330 per il nuovo FASTGate?

GIORGIA86

Ciao! Guarda, ho resettato l'apparecchio varie volte per cercare di farlo ricollegare ma finalmente ho trovato il problema. Aprendo la pagina di gestione dell'apparecchio (dlinkap.local), nella sezione Impostazioni/Extender ho notato che c'era impostata una password infinita mai vista sia su "rete esistente" che su "Wi-fi estesa" (non so perchè l'abbia autoimpostata).. l'ho sostituita con la password corretta del modem Fastweb e ora posso collegarmi al D link..
Può essere successo con il reset? Però non era neanche la password fornita dal produttore per il primo avvio dell'apparecchio..

m4ss1

Aggiornato primo messaggio: disponibile nuovo firmware 1.01B4 EU 20170822

luca789

Oggi ho telefonato all'assistenza dlink perchè il mio dap-1330 collegato via ethernet si blocca tutti i giorni.
Accade che i led della potenza del segnale sono tutti spenti, il pc si collega alla rete wifi dell'extender ma non c'è il collegamento a internet. non riesco nemmeno a collegarmi alla pagina di amministrazione dell'extender. devo staccarlo dalla presa e riattaccarlo, così per altre 24 ore circa funziona.
mi hanno mandato questo firmware DAP-1330_fw_reva_110b01_ALL_multi_20180330.zip

adesso vediamo se si rimette a funzionare.

ciao

m4ss1

Ciao Luca, grazie per la segnalazione.
Aggiornato primo messaggio :)

Pondera

#15
Nota edizione cumulativa firmware DAP-1330 A1 1.10 build 01 20180330.

DAP-1330 Hardware Release Notes


Firmware: 1.10B01
Hardware: Ax
Date: 2018/03/30

Note:
This release is to patch the WPA2 Key Reinstallation Attack (KRACK) Security Vulnerabilities affecting this product. The beta firmware will be followed up by a fully quality test release in approximately 4 weeks.

Problems Resolved:
A WPA2 wireless protocol vulnerability was reported to CERT//CC and public disclosed as: VU#228519 - Wi-Fi Protected Access II (WPA2) handshake traffic can be manipulated to induce nonce and session key reuse. The following CVE IDs have been assigned to VU#228519. These vulnerabilities in the WPA2 protocol:

•CVE-2017-13077: reinstallation of the pairwise key in the Four-way handshake
•CVE-2017-13078: reinstallation of the group key in the Four-way handshake
•CVE-2017-13079: reinstallation of the integrity group key in the Four-wayhandshake
•CVE-2017-13080: reinstallation of the group key in the Group Key handshake
•CVE-2017-13081: reinstallation of the integrity group key in the Group Keyhandshake
•CVE-2017-13082: accepting a retransmitted Fast BSS Transition Re-associationRequest and reinstalling the pairwise key while processing it
•CVE-2017-13084: reinstallation of the STK key in the PeerKey handshake
•CVE-2017-13086: reinstallation of the Tunneled Direct-Link Setup (TDLS)PeerKey (TPK) key in the TDLS handshake
•CVE-2017-13087: reinstallation of the group key (GTK) when processing aWireless Network Management (WNM) Sleep Mode Response frame
•CVE-2017-13088: reinstallation of the integrity group key (IGTK) whenprocessing a Wireless Network Management (WNM) Sleep Mode Responseframe

----------

Firmware: 1.01b04
Hardware: Ax
Date: 2017/07/17

Problems Resolved:
1. Supported the ExtenderMacAddress field and the SignalStrength filed in the ClientInfo struct.

----------

Firmware: 1.00b21
Hardware: Ax
Date: 2015/12/02

Note:
First Release

Pondera

Pubblicato firmware DAP-1330 A1 1.13_BETA build 01 20200117.

DAP-1330 Firmware Release Notes

Firmware: v1.13B01 BETA
Hardware: A1
Date: Jan. 20th, 2020

Problems Resolved:
-Fix few issues on Chrome/IE browser.
-Fix some IPv6 issue.
-Fix HT20/40 consistence issue.
-Fix potential security issue including WPA2 fixed.
-Fix management issue on Web page.
-ZDI-CAN-9554 - HNAP Authentication Implementation (chung96vn - Security
 Researcher of VinCSS (Member of Vingroup) working with Trend Micro ZeroDay Initiative)

Enhancements:
-Support IPv6.
-Support auto channel on Ethernet mode.
-Improve setup process.
-Disable 11d information.
-Improve Firmware upgrade process.
_____________________________________________________________________________________________________________________

DISCLAIMER: Please note that this is a device beta software, beta firmware, or hot-fix release which is still
undergoing final testing before its official release. The beta software, beta firmware, or hot-fix is provided on an
"as is" and "as available" basis and the user assumes all risk and liability for use thereof. D-Link does not provide
any warranties, whether express or implied, as to the suitability or usability of the beta firmware. D-Link will not
be liable for any loss, whether such loss is direct, indirect, special or consequential, suffered by any party as a
result of their use of the beta firmware.

m4ss1

Lo stato prodotto del DAP-1330 è stato aggiornato in "End of Sale".

D-Link continuerà a fornire assistenza per questo prodotto in linea con i termini e le condizioni di garanzia riportate qui.

Licenza Creative Commons
Il contenuto dei messaggi del forum è distribuito con
Licenza Creative Commons Attribuzione Non commerciale 4.0
Tutti i marchi registrati citati appartengono ai legittimi proprietari