DIR-615: Router Wireless N 300

Pondera · 2010-05-09T09:15:36+00:00

D-Link DIR-615 instradatore senza fili 802.11n 300 Mbps Revisione Hardware: Bx (Ubicom IP5090U), Dx (Ralink RT3052), Hx (Ralink RT3352), Qx (Realtek RTL8196E) DIR-615 Qx (Realtek RTL8196E) Particolarità Total Compatibility Works with any Wi-Fi certified device, so your older wireless devices will connect without hassle, giving you peace of mind and performance Total Security Complete set of security features including an SPI firewall and Wi-Fi Protected Access to shield your network from intruders Total Simplicity Setup wizard and Wi-Fi Protected Setup (WPS) make it easy to set up a home network and connect new devices Caratteristiche Connectivity • Wireless N technology offers increased speed and range over 802.11g/b standards¹. • Ethernet LAN and WAN ports let you connect via a wired or wireless connection • UPnP support facilitates the discovery of other devices on your network Security • Built-in Stateful Packet Inspection (SPI) firewall protects your network from malicious attacks • Wi-Fi Protected Access (WPA/WPA2) prevents intruders from gaining access to your network Compatibility • Backward compatible with all your older Wi-Fi certified devices • IPv6 support helps ensure that your network is future-proof Ease of Use • Intuitive setup wizard to speed up initial configuration • Wi-Fi Protected Setup (WPS) configures security features at the push of a button Panoramica Easily set up a fast, reliable, and secure wireless home network with the DIR-615 Wireless N Home Router. The setup wizard gets you up and running in no time, and with the push of a button your network will be protected from unwanted intruders. The DIR-615 is both backward and forward compatible so that you can share your Internet connection without any hassles. High-Speed Wireless Networking Create a high-speed wireless network for your home using the D-Link DIR-615 Wireless N Home Router. Connect the DIR-615 to a broadband modem and wirelessly share your high-speed Internet connection to enjoy surfing the web, checking e-mail, and chatting with family and friends online. The router uses Wireless N technology, which offers increased speed and range over 802.11g/b standards. Now you can experience reliable wireless connections from farther away, while also having the flexibility of connecting wired computers to the network. Securing Your Wireless Network The DIR-615 includes a built-in firewall that safeguards your network, allowing you to use the Internet without worrying about harmful attacks from the outside. It minimizes the threats of hackers and prevents intruders from entering your network. The DIR-615 supports Wi-Fi Protected Access (WPA and WPA2) to keep your network traffic secure, so you have complete control over exactly who is able to access your network. Easy Installation Set up the DIR-615 Wireless N Home Router in minutes using our intuitive Setup Wizard. The wizard will guide you through an easy-to-follow process to help you install your new hardware and successfully create your network. With the DIR-615 you’ll be browsing the web, making calls over the Internet, playing online games, and sharing content in no time. Compatibility Assurance The DIR-615 provides a high-speed connection to other 802.11n devices and is backward compatible with 802.11b/g, ensuring compatibility with a wide range of wireless devices. The DIR-615 includes four Ethernet ports for connecting Ethernet-enabled PCs, print servers, or other devices. In addition, the DIR-615 is Wi-Fi Protected Setup (WPS) certified, making it even easier to securely configure your wireless network. IPv6 Ready The DIR-615 Wireless N Home Router is certified as IPv6 Ready, signifying that it not only supports the future IPv6 protocol, but is also compatible with IPv6 equipment from other manufacturers, so you can be assured that your equipment is forward and backward compatible. Specifiche General Device Interfaces • Four 10/100 LAN Ports • One 10/100 WAN Port Antennas • Two fixed external 2 dBi omni-directional antennas Data Signal Rate • 2.4 GHz • Up to 300 Mbps¹ System Requirements • Cable or DSL modem with Ethernet port • An installed Ethernet adapter • Internet Explorer 6 or Firefox 2.0 or higher • Computer with Windows XP SP2, Windows Vista, Windows 7, or Mac OS X (v10.3/v10.4), or Linux-based Operating System Functionality Security • WEP 64/128-bit data encryption • Wi-Fi Protected Access (WPA/WPA2) • WPS Advanced • UPnP support • Multi-language web setup wizard Firewall Features • Network Address Translation (NAT) • Stateful Packet Inspection (SPI) • MAC address filtering • URL filtering Status LEDs • Power • Internet status • WLAN • LAN Mobile App Support • QRS Mobile Physical Dimensions • 148 x 113 x 32 mm (5.8 x 4.4 x 1.3 inches) Weight • 214 grams (0.47 lbs) Power • Input: DC 5 V/1 A Temperature • Operating: 0 to 40 °C (32 to 104 °F) • Storage: -20 to 65 °C (-4 to 149 °F) Humidity • Operating: 0% to 90% non-condensing • Storage: 5% to 95% non-condensing Certifications • WHQL • Wi-Fi • IPv6 • CE² ¹ Maximum wireless signal rate derived from IEEE standard 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely affect wireless signal range. ² For the EU region, this product is compliant with CE regulations and operates within the following frequency range: 2.4 - 2.4835 GHz. D-Link Corporation Datasheet. Updated 2016/06/22 Documentazione Rev. H/W: Bx Scheda tecnica Guida installazione Manuale utente Rev. H/W: Dx Scheda tecnica Guida installazione Manuale utente Rev. H/W: Hx Scheda tecnica Guida installazione Manuale utente Rev. H/W: Qx Scheda tecnica Guida installazione Manuale utente Firmware Rev. H/W: Bx Rev. Bx: Versione 2.27 (Build 01 Beta 02) 20100526 con nota edizione Rev. H/W: Dx Rev. Dx: Versione 4.14 (Build 04) 20131011 con nota edizione Rev. Dx: Versione 4.14 (Build 03) 20130913 con nota edizione cumulativa Rev. H/W: Hx Rev. Hx: Versione 8.05 (Build 05) 20130703 con nota edizione cumulativa Pacchetto lingua Italiano Versione 1.0 (Build 06) Rev. H/W: Qx Rev. Qx: Versione 17.03 (Build 01) 20151112 Pacchetto lingue Uso del pulsante REIMPOSTAZIONE (RESET) DIR-615 Dx Fonte D-Link UK There are various ways of resetting your router. If you cannot access the web user interface, a 'reset' button is situated on the back of most devices. Here are instructions to reset your device to default factory settings. Start with option 1, then 2 or 3 if not successful. Option 1, "Soft Reset" This will remove custom settings, but keep existing firmware In the web user interface, there is an option in TOOL-> SYSTEM, to set the router back to factory default settings. Option 2, "Hard Reset" This will remove custom settings, but keep existing firmware While power is ON, press and hold the 'reset' button on the back of your router for 10 seconds. Use a sharp object eg. a paperclip or a pen. Then release the button and wait until device restarts. Option 3, "Crash Reset" This will remove the current firmware. Next time you try to login, a message will show up, asking your for a firmware file/image. Power OFF the device. Press and hold the 'reset' button; while doing so, power on the device again and keep holding the 'reset' button for another 10 seconds. Then release the button and wait until device restarts. DIR-615 Emergency Room (ambiente di emergenza) Firmware alternativi Rev. H/W: Dx (Ralink RT3052) & Hx (Ralink RT3352) DD-WRT Wiki: D-Link DIR-615 rev D2 DD-WRT Wiki: D-Link DIR-615 rev D3 DIR-615 D3 come repeater DD-WRT DIR-300 A1/B1: modalità Repeater con DD-WRT DD-WRT: attivare i 300 Mbps a partire dalla r16994 Rev. H/W: Dx (Ralink RT3052) & Hx (Ralink RT3352) OpenWrt Wiki: D-Link DIR-615 Rev. H/W: Dx Guida installazione firmware a cura di a_big_friend Approfondimenti Connettere il router a internet mediante modem, altro router, HAG Fastweb Adding a Serial Port to a D-LINK DIR-615 A1 Blogspot - Dlink DIR-615 WikiDevi - DIR-615 rev B2 WikiDevi - DIR-615 rev D WikiDevi - DIR-615 rev H1 WikiDevi - DIR-615 rev Q2 Supporto internazionale D-Link Pagina prodotto: Italia Server FTP: Europa, Germania, BcnLab, Temp Supporto Tecnico: Taiwan TSD, USA, Canada

Pondera

L'aggiunta della sigla "/E" viene adottata anche da altri venditori in linea. Potrebbe essere l'abbreviazione di Europe, cioé di prodotti che non provengono dalla consociata D-Link IT che distribuisce il marchio sul territorio. Nel caso, come succede anche per i cellulari, questi prodotti non usufruirebbero della garanzia nazionale (e in teoria nemmeno dell'assistenza clienti!) ma è sempre l'importatore (in questo caso Amazon IT) che si fa carico della garanzia che l'acquirente deve avere per legge CE di 2 anni.

L'immagine sembra essere quella del DIR-615 H1, che dovrebbe essere ancora in produzione, ad un prezzo accettabile.

Non ci dovrebbero essere problemi con Fastweb o almeno in questa discussione non abbiamo ricevuto segnalazioni a riguardo.

Considera pure che D-Link ha messo in produzione tutta una serie di prodotti cloud e che i modelli DIR-300/600 sono stati sostituiti dal DIR-605L che al di là del cloud ha antenne più potenti da 5dBi contro quelle da 3dBi del DIR-615 H1 e che Amazon IT lo vende a prezzo simile.

Rufy87

Ti Ringrazio allora prendo il d link 605l se è migliore prendo quello...grazie mille...

zhell00

Ciao !
Scusate l'ignoranza, ma è normale che il router fornito da fastweb (Technicolor TG788vn v2) abbia una connessione wi-fi in download veloce circa il doppio di quella che ho attaccando il mio DIR-615 (ovviamente via LAN) al router?
Con il router fastweb, appunto, gli speedtest mi arrivano ai 20 mega in download, 5 in up; attaccando il DIR-615 la media è 10 in down 5 up. C'è qualche specifica tecnica che non permette una più alta diffusione della velocità?
Non voglio usare per il segnale wireless il router di fastweb perchè è decisamente instabile, si disconnette da solo continuamente..
La mia connessione è una ftts ..

Pondera

Revisione hardware? Versione firmware?

zhell00

Firmware Version : 4.11
Revisione hardware non so bene cosa sia.. Tra l'altro sul sito (http://www.dlink.com/it/it/support/product/dir-615-wireless-n-300-router?revision=deu_revh) non ho ben capito cosa devo cliccare, se revision B-D-H-Q...

Entheos

Dal numero di versione hai la Revision D.
Conviene aggiornare all'ultimo firmware disponibile per la tua revisione hardware nel primo post.

Pondera

Pubblicato firmware DIR-615 Hx 8.05 Build 05 20130703.

DIR-615 Firmware Release Notes

Firmware: FW805B05
Hardware: Hx
Date: 2013/07/03

Note:
1. FW version is advanced to v8.05B05

Problems Resolved:
1. Fix Access Control - Application Rules coherence issue.

Enhancements:
None


Firmware: FW805B04
Hardware: Hx
Date: 2013/06/21

Note:
1. FW version is advanced to v8.05B04

Problems Resolved:
1. Fixed the multiple security vulnerabilities.
- Solve PPPoE account setting security vulnerabilities issue – Inject Shell Command and CSRF attack.
- Solve Administrator setting security vulnerabilities issue
- Solve security vulnerabilities issue for Ping function.
- Solve firmware upgrade cannot work. It is caused by FW805B01 (only FW8.05 has this FW upgrading issue)
2. Fixed the multiple security vulnerabilities reported from iii
- Command Injection (tools_vct.htm)
- Cross Site Scripting (adv_filters_url.htm)
- Cross Site Scripting (adv_ipv6_pppoe.htm)
- Cross Site Scripting (tools_ddns.htm)
- Cross Site Scripting (tools_email.htm)
3. Fixed the issue that when logging in with Chrome or Firefox browser in Linux system, it will be failed to access into management page.
4. Fixed the issue that when logging in with Chrome or IE browser in Windows system, it will be failed to access into management page.
5. Fixed the issue that sometimes the changed settings can’t be applied in the system via Firefox browser.

Enhancements:
None


Firmware: 8.05B02
Hardware: Hx
Date: 2013/04/17

Note:
1. FW version is advanced to v8.05B02

Problems Resolved:
1. Fixed the multiple security vulnerabilities.
- Solve PPPoE account setting security vulnerabilities issue – Inject Shell Command and CSRF
attack.
- Solve Administrator setting security vulnerabilities issue
- Solve security vulnerabilities issue for Ping function.



Release FW804B02beta
Release Note 
Date: Jan. 18, 2013


Firmware version: FW804B02beta
Apps Version: 0.4.12
Language Pack version: 101b01

1. Function added
(1) Support manual year setting to 2020


Modification in FW804B01beta01 | 04/09/2012 

Notes: 
1. Upgrade firmware file “DIR615Hx-FW804B01beta01.bin” 
2. Language pack files: 
(1) DIR615H2_101b01DE.lng 


Modification in FW804B01beta01 | 9/04/2012 

1. Function added
(1) Support Schedule over midnight


Modification in FW804B01 | 4/26/2012 

1. Function added 
(1) Support IPv6 DS-Lite function. 
2. Issue fixed 
(1) Solve the issue that SetIPv6Settings_PPPoE and GetIPv6Settings_PPPoE tests are failure by 
using HNAP tools v1.4. 
(2) Solve the issue that IPv6 PPP connection on demand cannot work. 
(3) Modify admin-password length to 15 digits for Web GUI and DCC wizard. 
(4) Modify “Send Logs on Email” function’s behavior that clears all Logs after sending email 
while Logs is full. 
(5) Solve the issue that LAN IPv6 address is incorrect when manually settings LAN IPv6 address. 


Modification in FW803B02 | 1/30/2012 

1. Function added 
2. Issue fixed 
(1) Modify WPS-PIN method behavior as D-Link requirement. 
(1) WPS-PIN method default is disabled. 
(2) WPS-PIN method automatical disabled after finishing WPS connection. 
(2) Solve the issue that device cannot work properly after adding new port forwarding rules. 


Modification in FW803B01 | 1/12/2012 

1. Function added 
2. Issue fixed 
(1) Solve the issue that WPS PIN method brute force attack vulnerability. 


Modification in FW802B08 | 12/21/2011 

1. Function added 
2. Issue fixed 
(1) Solve the issue that PPTP cannot work properly. 
(2) Solve the issue that PPPoE cannot work properly. 


Modification in FW802B07 | 12/15/2011 

1. Function added 
2. Issue fixed 
(1) Solve the issue that PPPoEv6 and 6to4 function is abnormal. 
(2) Solve the issue that inserted rule of DHCP reservation is abnormal. 


Modification in FW802B06 | 10/27/2011 

1. Function added 
(1) Support PPPoEv6 and 6to4 functions of IPv6 connection. 
2. Issue fixed 
(1) Solve SMTP interoperability issue with different Email server. 


Modification in FW802B05 | 9/1/2011 

1. Function added 
2. Issue fixed 
(1) Solve the issue that the port scan function is abnormal on DHCP connection mode. 
(2) Modify PPPoE/PPTP/L2TP maximum idle time setting for DCC Wizard 
(3) Solve the issue that the IPv6 address range of Stateful (DHCPv6) setting is incorrect by using 
HNAP test tool. 


Modification in FW802B04 | 7/28/2011 

1. Function added 
(1) Support IPv6 Auto Configuration settings on Web GUI 
(2) Support Get/Set IPv6 Link Local settings and Static IP settings in HNAP protocol 
(3) Support IPv6 Auto Configuration settings in HNAP protocol 
2. Issue fixed 
(1) Improve throughput performance with 1*32MB SDRAM 


Modification in FW802B03 | 5/12/2011 

1. Function added 
2. Issue fixed 
(1) Solve the issue that wireless client cannot connect to DUT after setting the WEP Key by using 
HNAP Interface Verification (Dlink_HNAP0509/ Dlink_HNAP.exe) 


Modification in FW802B02 | 4/18/2011 

1. Function added 
2. Issue fixed 
(1) Fix some bugs for HNAP 1.1 test tools (TestDevice.App) 


Modification in FW802B01 | 4/11/2011 

1. Function added 
(1) Support GetWLanRadios function in HNAP protocol 
(2) Support GetWLanRadioSettings function in HNAP protocol 
(3) Support GetWLanRadioSecurity function in HNAP protocol 
(4) Support GetRouterLanSettings function in HNAP protocol 
(5) Support RestoreFactoryDefaults function in HNAP protocol 
2. Issue fixed 


Modification in FW801B02 | 3/15/2011 

1. Function added 
2. Issue fixed 
(1) Modify the PPP connection username and password length to 64 


Modification in FW801B01 | 2/10/2011 

1. Function added 
(1) Add current language information in hidden page 
(2) Default QoS function is disabled 
2. Issue fixed 
(1) Solve the issue that PPP on demand mechanism is abnormal 
(2) Solve the issue that DDNS function doesn’t work 
(3) Solve the issue that Access Control and Web filter rule settings is wrong 
(4) Solve the issue that PPP reconnect mode is incorrect by using DCC wizard 


Modification in FW800B15 | 1/29/2011 

1. Function added 
2. Issue fixed 
(1) Solve the device interoperability issue for D-Link ADSL Modem (DSL-320B) 


Modification in FW800B14 | 1/27/2011 

1. Function added 
2. Issue fixed 
(1) Solve the issue that ShieldsUP WAN Scan failed 
(2) Solve the issue that WLAN visibility status is incorrect by using DCC wizard 
(3) Modify default PPP reconnection mode to “On demand” 


Modification in FW800B13 | 1/19/2011 

1. Function added 
2. Issue fixed 
(1) Solve the issue that some strings aren’t un-translated and update language pack 


Modification in FW800B12 | 1/18/2011 

1. Function added 
2. Issue fixed 
(1) Solve the issue that the DHCP client cannot send solicit DHCPv6 packet immediately 
(2) Solve the issue that SLAAC + Stateless DHCPv6 doesn’t bring option(25) RDNSS in the RA 
packet 
(3) Solve Web GUI issues 
# Status->IPv6: The IPv6 default Gateway always show "--". 
# Status->IPv6: There is not a DHCP-PD information in the IPv6 connection information. 
# Advanced->IPv6: When user check "Eanble automatic IPv6 address assignment", the 
Autoconfiguration Type and RA lifetime must be disabled. 
# Advanced->IPv6/Use Link-Local Address is enabled: The IPv6 address and Subnet Prefix 
Length are incorrect. 
# Status->IPv6: IPv6 Connection Type : Link-local only, not Link-local. 


Modification in FW800B11 | 1/17/2011 

1. Function added 
(1) Support DHCP-PD function 
(2) Support using Link-Local Address on Static IPv6 mode 
(3) Support SLAAC + RDNSS function 
(4) Support SLAAC + Stateless DHCP function 
2. Issue fixed 
(1) Solve the issue that the user manual DNS of DHCPv6 function cannot work 
(2) Solve the issue that the DUT has a chance to cause freeze during the wireless reloading 
(3) Solve the issue that IPv6 Address Range format is wrong on Stateful (DHCPv6) mode 
(4) Set the default SLAAC + RDNSS setup to Stateless 


Modification in FW800B10 | 1/11/2011 

1. Function added 
2. Issue fixed 
(1) Solve the issue that WAN settings can't be saved due DCC wizard always pop-up warning 
message 


Modification in FW800B09 | 1/10/2011 

1. Function added 
2. Issue fixed 
(1) Update language pack version to “100b02” 
(2) Solve the issue that the DHCPv6 Server gives an invalid primary IPv6 DNS address 
(3) Solve the issue that the device cannot get IPv6 DHCP IP from DSR-1000N 


Modification in FW800B08 | 1/3/2011 

1. Function added 
2. Issue fixed 
(1) Modify the Company name from DLink to D-Link on WebGUI 
“Copyright © 2004-2010 D-Link Corporation, Inc.” 
(2) Solve the issues in SQA bug list (DIR-615 H1-SQA-Test Plan-20101224-S5-Final) 
# D-20.13-2 WEB: WEB Content Check (Inbound Filter) 
# F-4.3.1-7 Browser IOT: IE 6 
# F-2.34.1-4 Inbound Filter Test: Add Rules Test 
# F-2.1.3.11.2-1 PPPoE Test: On Demand Test 
# F-2.2.8.2-2 WPS Test: SW PBC Test 


Modification in FW800B07 | 12/22/2010 

1. Function added 
2. Issue fixed 
(1) Solve the issue that Rest PIN Code to Default is abnormal 
(2) Solve the issue that DHCP Server behavior is abnormal after checking the Always Broadcast 
(3) Solve the issue that Learn NetBIOS from WAN function cannot work 
(4) Solve the issue that Schedule function is abnormal 
(5) Add a restricted rule that WPS function cannot work with WEP-Shared Key 
(6) Modify default wireless cipher type to TKIP/AES in Auto-WPA 
(7) Solve the issues in SQA bug list (DIR-615 H1-SQA-Test Plan-20101220-S5) 
# F-2.17.7-6 WEB: WEB Content Check (DDNS Status) 
# F-2.17.7-7 WEB: WEB Content Check (Wireless Radio Status) 
# F-1.8.2-3 LED: Internet LED 
# F-2.17.7-8 WEB: WEB Content Check (DDNS Status) 
# F-2.34.1-3 Inbound Filter: Add Rules Test 
# F-2.17.7-9 WEB: WEB Content Check (Add Policy) 
# F-2.1.5.9.2-1 Reconnect Mode Test: On Demand Test 
# F-2.1.5.9.2-1 DHCP Server 
# F-2.1.5.9.2-2 Reconnect Mode Test: On Demand Test 
# F-2.35.10-1 Virtual Server: Wake On LAN 
# F-2.17.7-13 WEB: WEB Content Check (Email Log) 
# F-2.2.8.3-1 WPS Test: Enrollee PIN Test 
# F-2.2.8.3-2 WPS Test: Enrollee PIN Test 
# D-20.13-2 WEB: WEB Content Check (Inbound Filter) 
# F-2.34.1-4 Inbound Filter: Add Rules Test 
# F-2.13.1-6 WEB GUI Friendly Test 
# F-2.48-2 Static Routing Test 
# F-2.13.1-7 WEB GUI Friendly Test 
# F-2.17.7-10 WEB: WEB Content Check (Add Policy) 
# F-2.17.7-11 WEB: WEB Content Check (Add Policy) 


Modification in FW800B06 | 11/29/2010 

1. Function added 
(1) Support Restore Factory Defaults function in HNAP protocol 
(2) Support CAPTCHA function in HNAP protocol 
(3) Support DSCP function in QoS Engine 
2. Issue fixed 

(1) Solve the issues in SQA bug list (DIR-615 H1-SQA-Test Plan-20101126) 
# F-2.2.8.7 (3) Windows 7 PBC Test 
# F-2.13.1 (2)(3)(4) WEB GUI Friendly Test 
# F-2.17.7 (5) WEB Content Check 
# F-2.29.2 Interface Status Check 
# F-2.30.1 Router Mode Test 
# F-2.46.1 Enable DNS Relay Test 
# F-2.48 Static Routing Test 
# F-4.3.1 (5)(6) Microsoft Internet Explorer 6 
# D-12.5 E-Mail Notification Service Test 
# D-19.2 (3) Description Format Check Test 
(2) Solve the issues in SQA bug list (DIR-615 H1-SQA-Test Plan-20101118) 
# F-2.1.1.2 Subnetting and Routing Test 
# F-2.2.8.7 Windows 7 PBC Test 
# F-2.13.1 WEB GUI Friendly Test 
# F-2.17.7 (2) WEB Content Check 
# F-2.18.1 (4) Ping Tools Test 
# F-2.19.5 Configure Restore Test 
# F-2.27.1 Enable and Disable QoS Engine Function Test 
# F-2.29.5 (2) IPv6 Status Check 
# F-2.30.4 (2)(3)(4) Wireless Wizard Test 
# F-2.31.1 (2) Static IPv6 Test 
# F-2.33.3 Log Web Access Only Test 
# F-2.33.4 Advanced Port Filters Test 
# F-4.1.1.4 WPA-PSK Test 
# F-4.1.1.5 WPA2-PSK Test 
# F-4.1.1.6 WPA/WPA2-PSK Test 
# F-4.1.2.4 WPA-PSK Test 
# F-4.1.2.5 WPA2-PSK Test 
# F-4.1.2.6 WPA/WPA2-PSK Test 
# F-4.1.3.4 WPA-PSK Test 
# F-4.1.3.5 WPA2-PSK Test 
# F-4.1.3.6 WPA/WPA2-PSK Test 
# F-4.1.4.4 WPA-PSK Test 
# F-4.1.4.5 WPA2-PSK Test 
# F-4.1.4.6 WPA/WPA2-PSK Test 
# F-4.1.4.4 WPA-PSK Test 
# F-4.1.4.5 WPA2-PSK Test 
# F-4.1.4.6 WPA/WPA2-PSK Test 
# F-4.2.7.7 WPS WPA2-PSK AES Test 
# F-4.2.8.7 WPS WPA2-PSK AES Test 
# F-4.3.1 Microsoft Internet Explorer 6 
# D-11.2 Graphical Regerate Test 
# D-11.3 Graphical Enbale/Disable Test 
# D-12.5 E-Mail Notification Service Test 
# D-13.1 Consoles Security Test 
# D-19.2 (1)(2)(3) Description Format Check Test 


Modification in FW800B05 | 11/12/2010 

1. Function added 
(1) Support LLMNR function 
(2) Support LAN IPv6 client list 
(3) Support WPS LED 
2. Issue fixed 
(1) Solve the issues in SQA bug list (DIR-615 H1-SQA-Test Plan-20101105) 
# 1.8.3 WLAN LED 
# 2.1.1.2 Subnetting and Routing Test 
# 2.2.8 (2) WPS Test 
# 2.2.8.4 Enrollee Randomness PIN Test 
# 2.2.8.6 External Registrar PIN Test 
# 2.2.8.7 Windows 7 PBC Test 
# 2.10.1 Intel UPnP Tools Test 
# 2.10.3 UPnP Presentation Test 
# 2.10.5 Microsoft Internet Connectivity Evaluation Tool 
# 2.17.1 (4)(5)(6) WEB Content Format Check 
# 2.17.2 WEB Content Length Check 
# 2.17.3 WEB Content Default Value Check 
# 2.17.7 (1) WEB Content Check 
# 2.18.1 (4)(5) Ping Tools Test 
# 2.19.10 Upload Language pack Test 
# 2.29.5 IPv6 Status Check 
# 2.30.4 Wireless Wizard Test 
# 2.40.1 Email Settings Test 
# 2.41.2 Enable Graphical Authentication Test 
# 2.44.3 WAN Port Speed Test 
# 2.46.2 Disable DNS Relay Test 
(2) Solve the issues in SQA bug list (DIR-615 H1-SQA-Test Plan-20101108) 
# 2.1.6 MAC Clone Test 
# 2.2.8 (3) WPS Test 
# 2.13.1 WEB GUI Friendly Test 
# 2.17.1 (1)(2)(3) WEB Content Format Check 
# 2.17.10 (2)(6)(7)(8) WEB Submit Behavior Check 
# 2.27.2 Automatic Uplink Speed Test 
# 2.31.6 Stateless Autoconfiguration Test 
# 2.31.7 LAN side Stateless Autoconfiguration Test 
# 2.41.8 Login Test 
# 2.43.2 Device Information Check 
# 2.43.5 Internet Status Check 
# 2.43.5 Widget behavior Check 
# 1.2 LLMNR URL Test 
# 2.1 Hidden Page URL Test 
# 11.4 Graphical Default Value Check 
# 12.2.2 Language Package Test 
# 12.4 Language Infromation Check Test 
# 12.5 E-Mail Notification Service Test 
(3) Solve the issues about WCN UPnP configure and connect to AP series for Win 7 Logo Test 
(4) Solve the TX Power Compensation issue 


Modification in FW800B04 | 10/29/2010 

1. Function added 
(1) Support IPv6 functions 
(2) Support LOG Level setting 
(3) Support automatic uplink speed detection in QoS Engine 
(4) Support Recovery Mode in bootloader 
2. Issue fixed 
(1) Solve the issues in SQA bug list (DIR-615-SQA-Test Plan-20101029) 
# 2.17.5 WEB Content Hyperlink Check 
# 2.41.1 Admin & User Password Test 
(2) Solve the issues in SQA bug list (DIR-615-SQA-Test Plan-20101026) 
# 1.1.1 Upgrade Test 
# 1.8.2 Internet LED 
# 2.2.5.14 Channel Bandwidth Test 
# 2.2.8.6 (1) External Registrar PIN Test 
# 2.19.2 Firmware Upgrade Test 
# 2.41.2 Enable Graphical Authentication Test 
# 2.45.1 Basic Test 
# 2.45.6 LAN side DHCP Server Test 
# 3 (1)(2) AP and Router NTP Specification 
# 3.3 (1) Daylight Saving Test 


Modification in FW800B03_RC3 | 10/20/2010 

1. Function added 
(1) Support QoS Engine 
(2) Support language pack upgrade for German, Spanish, French, and Italian 
2. Issue fixed 
(1) Solve the issues in SQA bug list (DIR-615-SQA-Test Plan-20101018) 
# 2.2.8.1 HW PBC Test 
# 2.2.8.2 SW PBC Test 
# 2.2.8.7 Windows 7 PBC Test 
# 2.2.8.8 Windows 7 PIN Test 
# 2.18.1 Ping Tools Test 
# 2.37.1 Schedule Rules Test 
# 2.41.2 Enable Graphical Authentication Test 
# 2.43.2 Device Information Check 
# 2.43.3 Wireless Status Check 
# 2.43.4 Network Status Check 
# 2.43.5 Internet Status Check 
(2) Solve the issues about WCN UPnP configure and connect to AP series for Win 7 Logo Test 
(3) Solve the issue that reset button could not test in factory mode

Pondera

Pubblicati firmware:

DIR-615 Dx 4.14 Build 03 20130913
DIR-615 Dx 4.14 Build 02 20130416.

DIR-615 Firmware Release Notes 

Firmware: 4.14B02
Hardware: Dx
Date: 2013/04/16

Problems Resolved:
1. Fixed the multiple security vulnerabilities.


Firmware: 4.13b03
Hardware: Dx 
Date: 2013/01/22

Problems Resolved: 
1. Support manual year setting to 2037


Firmware: 4.13b02
Hardware: Dx 
Date: 2010/12/06

Problems Resolved: 
1. Closed a publicly disclosed potential vulnerability.

Pondera

Note edizione riassemblate (fonti 1 & 2) per il firmware DIR-615 Bx 2.27 Build 01 Beta 02 20100526.

DIR-615B2 release notes history.
====================================================

V 2.27, Build 01 Beta 02, 2010/05/26
Bug Fix:
1. Fixed admin password can only contain printable characters.

V 2.27, Build 01 Beta01,2010/01/15, John Huang
1.Ubicom SDK 7.4.2 build 0056, 2009, Sep 15, UBICOM_7_4_2_B0056
2.Checksum: 042c1dee
3.HNAP security bug, could send set command in with "GetDeviceSettings" SoapAction.

V 2.25, build 03 Beta 01, 2009/9/14, EricK
1. Ubicom SDK 7.4.2 build 0038, 2009, Mar 20, UBICOM_7_4_2_B0038, with unicast ARP scan patch
2. CheckSum: 0X042D2293
3. send arp/ip scan by unicast.

V 2.26, build 01Beta, 2008/06/18, by Vic
1.Ubicom SDK 7.4.2 build 0038, 2008, Jun 17, UBICOM_7_4_2_B0038
2.CheckSum:0X042d8fb8
3.Fix PPTP Client disconnect automatically in 4-5 minutes

 
V 2.24, build 03, 2008/05/23, by Jerry
1.Ubicom SDK 7.4.2 build 0037, 2008, May 19, UBICOM_7_4_2_B0037
2.CheckSum: 0X042d6b82 
3.fix bug : Case No.HQ20080415000005 in HongKong WEB TV issue
 

V 2.25, build 02, 2008/05/16, by Jerry
1.Ubicom SDK 7.4.2 build 0036, 2008, Apr 29, UBICOM_7_4_2_B0036
2.CheckSum: 0X042d65ba 
 3.downupgrade to HNAP 1.0

V 2.25, build 01, 2008/05/07, by Vic
1.Ubicom SDK 7.4.2 build 0036, 2008, Apr 29, UBICOM_7_4_2_B0036
2.CheckSum: 0X042bb84a
3.Use purenetwork 1.1
4.For Vista logo DTM1.2

V 2.25, build 00, 2008/03/06, by Vic
1.Ubicom SDK 7.4.2 build 0016, 2008, May 6, UBICOM_7_4_2_B0016
2.Use XML-Agent 1.4
3.Add NetBios
4.Add QoS Engine
5.Add WCN2.0

V 2.24, build 00, 2007/12/17, by Vic
1.Ubicom SDK 7.4.1 build 0054, 2007, Dec 13, UBICOM_7_4_1_B0054
2.Change the version


V 2.23, build 02, 2007/12/14, by Vic
1.Ubicom SDK 7.4.1 build 0054, 2007, Dec 13, UBICOM_7_4_1_B0054
2.add back the ALGs(Advanced/firewall.stml),ALG HELP(Help/Advanced.shtml#Firewall)
3.Fix Multicast streams leak out on the WAN interface
4.Remove 802.11d and BigPond

V 2.23, build 01, 2007/11/15, by Jerry
1.Ubicom SDK 7.4.1 build 0048, 2007, Nov 13, UBICOM_7_4_1_B0048
2.Fix: Intel 3945abg uncheck 'enable device registration' and no-security issue
3.Fix: Intel 3945abg uncheck 'enable device registration' with wep 64/128 issue
4.Widget login fail, will not response with .html (for Apple)
    add login_fail.xml
    modify gw_web_server.c
5.Fix bug (follow Ubicom Thomas' code to modify) : WPS with Intel3945abg connection failed

V 2.23, build 00, 2007/10/19, by John
1. Ubicom SDK 7.4.1 build 0036, 2007, Oct 17, UBICOM_7_4_1_B0036
2.Remove DHCP option 60
3.Fix: Port Forwarding port number can set the same with Virtual Server
4.Fix: Daylight Saving Dates start date and end date can set the same day.
5.Fix: Port Forwarding port number can set the same with Virtual Server
6.chklst.txt add two item, 	Firmware Notify URL and Firmware Global URL
7.fw notify url, HW Version use Ax,Bx (not A1/A2/...,B1/B2...)
8.widget( http://192.168.0.1/router_info.xml?section=system_info)
  <frimware_update_info_url> : use dlink use dlink new firmware query url 
  <firmware_url> : use url from site 'gloabl' or http://www.dlink.com.tw if not find site 'global'
9.email notification use new firmware url (refernece item 7)
10.Fix bug : to run DCC will make MTU become 0.

V 2.22, build 00, 2007/09/11, by Bobby
1. Ubicom SDK 7.4.1 build 0024, 2007, Sep 4, UBICOM_7_4_1_B0024
2. remove "http://purenetworks.com/HNAP1/SetAccessPointMode" function for purenetwork test.

V 2.21, build 07, 2007/08/27, by Bobby
1. Ubicom SDK 7.4.1 build 0018, 2007, Aug 24, UBICOM_7_4_1_B0018
2. New firmware version query and download
3. Fixed ZIPB/half bridge mode

V 2.21, build 06, 2007/08/15, by Bobby
1. Ubicom SDK 7.4.1 build 0009, 2007, Aug 14, UBICOM_7_4_1_B0009
2. Remove Help/Advanced.shtml Routing item.

V 2.21, build 05, 2007/08/09, by Bobby
1. Ubicom SDK 7.4.1 build 0006, 2007, Aug 6, UBICOM_7_4_1_B0006
2. Modify Download firmware URL.

V 2.21, build 04, 2007/08/08, by Bobby
1. Ubicom SDK 7.4.1 build 0006, 2007, Aug 6, UBICOM_7_4_1_B0006
2. Fix Time: Current Router Time, some days will not enter day light saving (such as Aug 7)
3. Change Device Name to Wirelessd N Router

V 2.21, build 03, 2007/08/08, by Bobby
1. Ubicom SDK 7.4.1 build 0006, 2007, Aug 6, UBICOM_7_4_1_B0006
2. CPU: IP5100, switch MVL6060/6061
3. fix word: Advanced -> Advanced Wireless: 802.11d -> 'Counrty' to 'Country' 
4. Fix Widget issue: LAN status show wrong.  LAN status sequence wrong 
   (can check this URL http://192.168.0.1/router_info.xml?section=system_info)
5. Remove Advanced/Routing.shtml, Advanced/Traffic_Shaping.shtml, Advanced/WISH.shtml Status/WISH_Sessions.shtml pages.

V 2.21, build 02, 2007/08/06, by EricKuo
1. Ubicom SDK 7.4.1 build 0006, 2007, Aug 6, UBICOM_7_4_1_B0006
2. CPU: IP5100, switch MVL6060/6061
3. modify default idle timeout value of pppoe/l2tp/pptp to 5 minutes

V 2.21, build 01, 2007/08/06, by Bobby
1. Ubicom SDK 7.4.1 build 0006, 2007, Aug 6, UBICOM_7_4_1_B0006
2. CPU: IP5100, switch MVL6060/6061 (DIR-655: CPU: 5160, switch Vitesse 7385)
3. (Fix 15) RTS Threshold default value from 1..2347 to 0..2347
4. (Fix 4)  popup message change to "Schedule '%s' can't be deleted or renamed because it is used." , %s = schedule name             
5. Fix FIREWALL SETTINGS -> DMZ HOST computer name is too long, format will change   
6. 'Enable Multcast Streams' default value to disable
7. Fix cannot block url/domain in web filter, keyword like 'yahoo' 'pchome' 'google' ... 


V 2.21, build 00, 2007/08/02, by Bobby
1. Ubicom SDK 7.4.1 build 0002, 2007, July, 31, UBICOM_7_4_1_B0002
2. CPU: IP5100, switch MVL6060/6061 (DIR-655: CPU: 5160, switch Vitesse 7385)
3. Change New SDK 7.4.1 
4. Fix Reserve DHCP Client function fail when use 'Edit' function    

   (Not Need reboot router)
5. PPPOE with MS CHAP, if challenge Handshake Authentication Protocol use wrong(unexpect) data, router will crash
   (Example Message: E=691 R=1 C=Data   if Data characters size gigger than 100~200 bytes or No C=Data) 
6. Schedule rule cannot be deleted or rename when wireless schedule in use
7. Fix: daylight saving - popup message 'DST end month must be different than DST start month'
8. Remove Advanced->Firewall Settings->ALG help
9. Inbound Filter more check illegal ip address, such as 127.x.x.x, 224.x.x.x~239.x.x.x
10. Reboot Need if Enable <-> Disable DMZ function
11. Access Control, Policy Name show incorrectly, if name contain '<' '>'
12. Access Control, Step 3, if IP address and MAC are same Machine, popup warning.
13. Fix Time: Current Router Time, add daylight saving offset if daylight saving enable and into day light saving date
14. Fix Time: Daylight Saving Dates add 6th week
15. QoS Engine, remote ip address check illegal ip address, such as 127.x.x.x, 224.x.x.x~239.x.x.x
16. Status->Device Info:  fix: QoS Engine status, determine by Traffic Shaping Status 
17. RTS Threshold default value from 0..2347 to 1..2347
18. PPPOE/L2TP/PPTP Manual Mode, 'Idle Time' field to gray. (and value set to 0) 
19. Fix router will reboot if wps with unconfige mode and add new station.

V 2.20, Build 07, 2007/07/02, Aaron
1. Ubicom SDK 7.4 build 0020, 2007, June 26, UBICOM_7_4_B0020
2. For Vista logo issue.

V 2.20, Build 06, 2007/07/02, Aaron
1. Ubicom SDK 7.4 build 0020, 2007, June 26, UBICOM_7_4_B0020
2. Add Wireless Device with WPS -> Choose Manual and press Next, 
   if security mode is WEP, 'key in Use' cannot show which key in used.
3. WMM/WISH problem in the FTP Server
4. Support 802.11d
5. checklist.txt add three item
   ssid 
   wireless region -- current wireless region (UBICOM use)
   wireless domain -- directly read domain from WLAN NIC EEPROM 


V 2.20, Build 05, 2007/05/30, Bobby
1. Ubicom SDK 7.4 build 0015, 2007, May, 30, UBICOM_7_4_B0016
2. Fixed DDNS button.
3. Fixed MTU Configuration after completion of the Internet Connection Setup Wizartd for PPPoE.

V 2.20, Build 04, 2007/05/30, Bobby
1. Ubicom SDK 7.4 build 0015, 2007, May, 30, UBICOM_7_4_B0016
2. Fix user can use WPS via VISTA
3. WPS/unconfigure to configure, First time use PIN/PBC,
   defualt channel to 6,default security WPA-PSK, TKIP 

V 2.20, Build 03, 2007/05/29, Bobby
1. Ubicom SDK 7.4b build 0015, 2007, May, 25, UBICOM_7_4_B0015
2. FIx Adanved Help, WLAN Partition.

V 2.20, Build 02, 2007/05/29, Bobby
1. Ubicom SDK 7.4b build 0015, 2007, May, 25, UBICOM_7_4_B0015
2. Fix Firmware update URL 
   Update Info: http://support.dlink.com/references/DIR-615revB2/DIR615revB2_ref_firmware.xml 
   Firmware File URL: http://support.dlink.com/products/view.asp?productid=DIR%2D615%5FrevB2 
3. Fodified PureNetWork to router mode, 
   Fix Quick Router Setup Wizard. 
4. Delete Help Bridge Information
5. VS and PF check ramote admin http port
6. Advanced Wireless, Change L2 Isolation => WLAN Partition  
7. Advanced help, Change L2 Isolation => WLAN Partition
8. Modify Help\Advanced\>Anti-Spoof checking Change
9. New WPS Wizard and wireless wizard
10. remove suppport Glossary
11. chklst.txt show release version or debug version
12. Static routing, can not enable two or more routing entry with same destination but different gateway
13. wireless Wizard, WPA auto and auto assgin key, SSID can change, not use dlinkxxxx (xxxx is last mac hex number)
14. Add wireless dvice with WPS, fix IE6 cannot operate issue
15. Fodified PureNetWork to router mode, 
    Fix Quick Router Setup Wizard. 

V 2.20, Build 01, 2007/05/15, Aaron
1. Ubicom SDK 7.4 build 0011, 2007, May, 15, UBICOM_7_4_B0011
2. Fix Firmware update URL 
   Update Info: http://support.dlink.com/references/dir-615b2/dir615b2_ref_firmware.xml
   Firmware File URL: http://support.dlink.com/products/view.asp?productid=DIR%2D615b2
3. Internet LED issue
   Check Internet connection status (same as Network status in Device Info Page; Not Check WAN Cable Status)
4. Intel IOT issue
5. LOG latest firmware version number show wrong, example: should display 3.01, wrong display 3.1


V 2.20, Build 00, 2007/05/15, Aaron
1. Ubicom SDK 7.4 build 0009, 2007, May, 8, UBICOM_7_4_B0009
2. Add/Fix Widget issue
3. Add DDNS Status 
4. Fix Application Rule, Protocol type 'BOTH' No Function issue


V 2.00, Build 01, 2007/05/09, Aaron
1. Ubicom SDK 7.4 build 0009, 2007, May, 8, UBICOM_7_4_B0009
2. DYNAMIC DNS: add www.DLinkDDNS.com
3. remove Help about 'WAN port Mode'
4. Support On-BOARD Firmware
5. Wireless Default channel width to 20MHz
6. DIR-6x5 Only IE6 + PPTP Connected + Click 'InterNet Wizard' Page, Device will crash
7. Support Manual Input Dyndns server name (dyndns.org)
8. Hide Bridge Mode Function
9. NO STATIC Routing


V 2.00, build 00, 2007/04/30, by Aaron
1. Ubicom SDK 7.4 build 0005, 2007, Apr, 27, UBICOM_7_4_B0005
2. CPU: IP5100, switch MVL6060/6061 (DIR-655: CPU: 5160, switch Vitesse 7385)
3. first release
4. No USB Function, No QOS, NO WISH

DavideM

ciao a tutti,vi spiego il problema...
ho acquistato tre router DIR615 uno per me uno per casa dei miei e uno per casa di un mio amico...
installo il primo andando sul IP del router digitando 192.168.0.1 entro nelle impostazioni e seguendo questa guida http://www.direte.it/_modules/download/download/EOLO/istruzioni-router-dlink-dir-300-eolo.pdf installo tutto perfettamente e funziona....stessa cosa con il secondo modem e va tutto bene
con il terzo una volta arrivato all'ultimo step dell'installazione della rete lan (pagina 5 della guida)...clicco connetti e mi dice "impostazioni salvate" e sotto inizi il conto alla rovescia dei 20 secondi di attesa...
mentre con gli altri due modem giunti a questo punto mi riportavano alla pagina iniziale delle impostazioni con questo mi si apre la pagina

log in to the router e mi chiede la password che però non conosco!!com' è possibile??

anche all'inizio esce questa pagina e basta lasciare il campo password vuoto e ti fa entrare...perche dopo lasciando il campo vuoto mi dice errata??...ho provato a mettere tutte le password del mondo(admin,e tutte le mie) e niente...ho schiacciato il pulsantino reset del modem e niente...non so più che fare...esiste un modo per resettare l modem dalle impostazioni in modo estremo??

ragazzi spero di essermi spiegato bene e spero in un vostro aiuto

buona domenica a tutti e grazie in anticipo

asartori

Buongiorno,
Sono nuovo nel forum e avrei bisogno di un aiuto nella configurazione del dir 615 con hag Fastweb.
Ho l'hag fastweb al piano terra e vorrei estendere alla taverna il segnale wireless con il dir.
Ho collegato il cavo ethernet dall'hag alla porta wan del dir.
L'indirizzo ip dell' hag è 192.168.1.254 quello del dir deve essere 192.168.1.xx o 192.168.0.xx?
Il dir è aggiornato al FW 4.13 devo attivare enable access poin mode sul dir?
scusate se magari non sono stato molto preciso ma ormai ho rpovato di tutto e non capisco più nulla.
grazie mille

m4ss1

asartori
Adesso funge ma senza spunta su enable access point mode.

E' normale perchè hai collegato cosi:

asartori
Ho collegato il cavo ethernet dall'hag alla porta wan del dir.

L'unico problema di questa configurazione è che se devi aprire le porte per un dispositivo collegato nella taverna devi farlo nell'hag per l'ip wan del dir-615 e poi nel dir-615 per l'ip lan del dispositivo...

m4ss1

Ciao, si devi attivare l'access point mode.
L'indirizzo ip gli verrà assegnato dall'hag, se ci sono problemi imposta manualmente 192.168.1.253

asartori

Prima metto l'ip al dir e poi metto la spunta su enable access poin mode?
In questo modo però mi dice che il dir prenderà un io dal hag fastweb tramite il dhcp è giusto così?
Grazie mille

m4ss1

asartori
In questo modo però mi dice che il dir prenderà un io dal hag fastweb tramite il dhcp è giusto così?
Grazie mille

Si si 😉

m4ss1 ha scritto:
L'indirizzo ip gli verrà assegnato dall'hag

asartori

Adesso funge ma senza spunta su enable access point mode.
Non vorrei che mettendola poi smetta di funzionare.
Cosa mi consigli? 😕

asartori

Quindi se io metto la spunta su enable access point mode devo collegare l'hag alla porta LAN del dir-615 e non a quella wan come ho fatto adesso?
Grazie mille

m4ss1

Se non ricordo male quando attivi l'access point mode la porta wan si configura da sola come una lan.

Carlo74

Salve,ho acquistato il router in oggetto, ho il modem fastweb, seguendo l'installazione da cd in dotazione il router funziona e pure il wifi... il problema e' che ogni tanto il pc perde la connessione dicendo "server dns ha smesso di funzionare " ed I cellulari perdono la connessione molto spesso pur rilevando la rete wifi ed essendone connessi .
Sapete dirmi quale puo' essere il problema ? Grazie

Pondera

Revisione hardware?
Versione firmware?

« Pagina precedente Pagina successiva »