[size=22]**D-Link DIR-885L**[/size] [size=18]**instradatore senza fili 802.11ac 3150 a doppia banda simultanea** **(1000 Mbps su 2,4 GHz + 2167 Mbps su 5 GHz)** **con tecnologia multi utente ad ingresso ed uscita multipli** **(MU-MIMO)**[/size] [img]https://eu.dlink.com/products/-/media/product-pages/dir/885l/dir885limageright2.png?w=700[/img] [img]https://eu.dlink.com/products/-/media/product-pages/dir/885l/dir885limageback.png?w=700[/img] [size=12]**DIR-885L Ax** (Broadcom BCM4709C0)[/size] [url="http://www.amazon.it/dp/B00PVDY9TO?tag=dlinfor-21"][img width=50]https://i.postimg.cc/RZLG7MNq/logo-amazon.png[/img][/url] [color=red]**Particolarità**[/color] **Wireless AC di ultima generazione** La tecnologia wireless e cablata più veloce attualmente disponibile, con velocità wireless combinate fino a 3.15 Mbps e Gigabit Ethernet. **MU-MIMO con AC SmartBeam™ avanzato** Aumenta drasticamente la copertura wireless, così potrai minimizzare i rallentamenti mentre giochi on-line, guardi film in 4K, trasferisci file e navighi in Internet con più dispositivi contemporaneamente. **Tecnologia Dual-Band con SmartConnect** Distribuisce il traffico su 2 radio Wi-Fi dedicate per una prestazione e affidabilità di rete ottimizzata. [size=12]Da scheda tecnica sede europea D-Link ultimo aggiornamento febbraio 2017[/size] [color=red]**Caratteristiche**[/color] **Processore da 1,4 GHz a doppio nucleo (dual core)** Potenza di elaborazione più elevata per supportare le app. **Flusso (stream) di dati 4x4** Supporta contemporaneamente 4 flussi dati per una aumentata capacità (throughput). **Tecnologia MU-MIMO** Potente banda larga con segnale senza fili (Wi-Fi) su più dispositivi contemporaneamente. **Connessione intelligente (SmartConnect)** Assegna la banda migliore possibile per fornire una prestazione ottimale. **Irradiamento intelligente (SmartBeam) AC avanzato** Segnali senza fili (Wi-Fi) focalizzati per connessioni più veloci affidabili. **Banda doppia (Dual-Band)** Bande 2,4 Ghz e 5 GHz. **Firmware alternativi a sorgente aperta (open source)** Gli utenti avanzati hanno la possibilità di modificare ulteriormente il proprio router utilizzando firmware alternativi a sorgente aperta come DD-WRT & OpenWrt. L'installazione di firmware personalizzato annulla la garanzia del prodotto e viene effettuata a proprio rischio. [size=12]Da sito IT adattamento[/size] [color=red]**Specifiche**[/color] **Wireless standard** Wireless AC Wave 2 **Frequency band mode** Dual-band simultaneous **Wireless speed** 1000 Mbps 2.4 GHz 2167 Mbps 5GHz **Antenna type** 4 detachable omni-directional antennas **Wired interface** 1 x Gigabit Ethernet WAN 4 x Gigabit Ethernet LAN **USB ports** 1 x USB 3.0 **Advanced features** MU-MIMO mydlink-enabled SmartBeam **DLNA** √ [size=12]Da sito IT & SG[/size] [color=red]**Documentazione**[/color] Scheda tecnica: [url="https://eu.dlink.com/-/media/consumer_products/dir/dir-885l/datasheet/dir_885l_datasheet_it.pdf"]Italiano[/url], [url="http://eu.dlink.com/-/media/consumer_products/dir/dir-885l/datasheet/dir_885l_datasheet_en.pdf"]English[/url] Guida installazione: [url="https://eu.dlink.com/-/media/consumer_products/dir/dir-885l/manual/dir_885l_a2_manual_v110_it.pdf"]Italiano[/url], [url="http://eu.dlink.com/-/media/consumer_products/dir/dir-885l/qig/dir_885l_a2_qig_v100_eu.pdf"]Multilingua[/url] [url="http://eu.dlink.com/-/media/consumer_products/dir/dir-885l/manual/dir_885l_a2_manual_v110_eu.pdf"]Manuale utente[/url] **Domande frequenti** (Frequently Asked Questions - FAQ) ~~[url="https://www.dlink.com.sg/dir-885L/#faqs"]D-Link SG[/url]~~ [url="https://downloads.dlink.com.sg/dir-885l/"]Nuovo SG[/url] [url="https://legacy.us.dlink.com/pages/product.aspx?id=917816fe412e4ef2ada6113374a795b0"]USA Legacy[/url] [color=red]**Emulatore**[/color] ~~[url="http://support.dlink.ca/emulators/dir885/111/home.html"]H/W:**A1** F/W:**1.11 2016-05-17 14:35:00**[/url]~~ [color=red]**Software**[/color] [url="https://eu.dlink.com/it/it/support/apps"]App D‑Link IT[/url] [url="https://it.mydlink.com/apps"]App mobile mydlink IT[/url] [url="https://www.dlink.com/en/consumer/apps"]D-Link Apps EN[/url] [url="https://us.dlink.com/en/ifttt"]IFTTT EN[/url] IFTTT: [url="https://ifttt.com/p/dlink"]dlink[/url], [url="https://ifttt.com/mydlink"]mydlink[/url] [url="https://www.dlink-forum.it/d/226"]Programmi di utilità/App SharePort & SharePort Plus[/url] [url="ftp://ftp2.dlink.com/SOFTWARE/SHAREPORTPLUS/"]Repositorio[/url] **Domande frequenti** (Frequently Asked Questions - FAQ) [url="https://eu.dlink.com/it/it/support/faq/routers/mydlink-routers/dir-880l/how-do-i-configure-shareport-web-access-on-my-router"]Come faccio a configurare SharePort Web Access sul mio router?[/url] [url="https://eu.dlink.com/it/it/support/faq/routers/mobile-routers/dir-series/dir-505/it_dir_505_configurazione_shareport_mobile"]Come faccio a impostare SharePort Mobile sul mio router?[/url] [url="https://support.dlink.com/mobile/main/mfaq.aspx?f=LBuiADS3Km%2B60EMFzdFMPA%3D%3D"]How do I access/use the USB port on my router?[/url] ~~[url="http://www.dlink.cc/d-link-router/how-to-install-the-d-link-shareport-utility-and-use-it-for-an-external-storage-device.html"]How to install the D-Link SharePort utility and use it for an external storage device?[/url]~~ [url="https://ftp.dlink.de/dir/dir-885l/driver_software/DIR-885L_sw_reva_GPLcode.tar.gz"]Codice sorgente GPL[/url] [color=red]**Firmware**[/color] ~~[url="http://www.mydlink.co.kr/2008/data/DIR885LA1_FW124KR.bin"]DIR-885L Ax 1.24KR 20200824[/url]~~ [url="https://d-link.co.kr/download/119/"]Nuovo collegamento[/url] [url="http://legacyfiles.us.dlink.com/DIR-885L/REVA/FIRMWARE/DIR-885L_REVA_FIRMWARE_1.21B03_BETA01_K24B.zip"]**DIR-885L Ax 1.21_BETA build 03-01_k24b 20200204**[/url] con nota edizione [url="https://ftp.dlink.de/dir/dir-885l/driver_software/DIR-885L_fw_reva_121b03neo_ALL_multi_20191127.zip"]DIR-885L Ax 1.21 build 03 neo 20191127[/url] con nota edizione cumulativa + firmware intermedio & istruzioni per la transizione | [url="ftp://ftp.dlink.ca/PRODUCTS/DIR-885L/DIR-885L_REVA_FIRMWARE_121B03.ZIP"]Altro[/url] | [url="http://legacyfiles.us.dlink.com/DIR-885L/REVA/FIRMWARE/DIR-885L_REVA_FIRMWARE_1.21B03_HOTFIX.zip"]Altro2[/url] DIR-885L Ax 1.21 build 03: • [url="https://dlink-me.com/ftp/DIR/DIR885LA1_FW121b03_L2TP_FQDN64_0312(0313180052).zip"]*20190312 ME - L2TP_FQDN64_0312(0313180052)*[/url] • [url="https://ftp.dlink.de/dir/dir-885l/archive/driver_software/DIR-885L_fw_reva_121b03-v6-MSS-i87c_ALL_multi_20180807.zip"]*20180807 DE - v6-MSS-i87c*[/url] con nota edizione cumulativa + firmware intermedio & istruzioni per la transizione • [url="http://legacyfiles.us.dlink.com/DIR-885L/REVA/FIRMWARE/DIR-885L_REVA_FIRMWARE_1.21B03_BETA.zip"]*20180119 US - BETA*[/url] con nota edizione + firmware intermedio per la transizione [url="https://media.dlink.eu/support/products/dir/dir-885l/driver_software/dir-885l_fw_reva_1-20b02_all_en_20171003.zip"]DIR-885L Ax 1.20 build 02 20170928[/url] con nota edizione + firmware intermedio & istruzioni per la transizione [url="https://ftp.dlink.de/dir/dir-885l/archive/driver_software/DIR-885L_fw_reva_113b03_ALL_multi_20161129.zip"]DIR-885L Ax 1.13 build 03 20161129[/url] con nota edizione cumulativa (ultimo firmware NON CRIPTATO da usare per il RECOVERY) [url="https://www.dlink-forum.it/d/4390"]Abbandono del protocollo FTP nei browser per PC[/url] [color=red]**Supporto internazionale D-Link**[/color] Pagina prodotto: [url="http://www.dlink.it/products/dir-885l-ac3150-mumimo-ultra-wifi-router"]Italia[/url], [url="https://www.dlinkmea.com/index.php/product/details/?det=S2t2THFiMm5aZC9QZzJaYkdPNTF6dz09"]Medio Oriente[/url], ~~[url="http://www.dlink.com.sg/product/dir-885l-ac3150-mu-mimo-ultra-wi-fi-router/"]Singapore[/url]~~ [url=https://downloads.dlink.com.sg/product/dir-885l-ac3150-mu-mimo-ultra-wi-fi-router/]Nuovo SG[/url], [url="https://www.dlink.com.au/home-solutions/DIR-885L-ac3150-ultra-wi-fi-router"]Australia[/url], ~~[url="http://www.mydlink.co.kr/2013/support/product_detail.php?type=router&no=208&model=DIR-885L"]Corea[/url]~~ [url="https://d-link.co.kr/products/25/"]Nuovo KR[/url] Repositorio scaricamenti: [url="https://ftp.dlink.de/dir/dir-885l/"]Germania[/url], ~~[url="ftp://ftp.dlink.ca/PRODUCTS/DIR-885L/"]Canada[/url]~~ Supporto Tecnico: [url="http://tsd.dlink.com.tw/"]TW TSD[/url], [url="https://www.dlinktw.com.tw/techsupport/ProductInfo.aspx?m=DIR-885L"]Taiwan[/url], [url="https://legacy.us.dlink.com/pages/product.aspx?id=917816fe412e4ef2ada6113374a795b0"]USA Legacy[/url], ~~[url="https://it.mydlink.com/support#DIR-885L"]IT mydlink[/url]~~, ~~[url="https://mydlink.co.kr/2013/beta_board/product_detail.php?no=208&model=DIR-885L"]Corea[/url]~~

[color=red]**Approfondimenti**[/color] **Info** WikiDevi: [url="http://techinfodepot.shoutwiki.com/wiki/D-Link_DIR-885L_rev_A1"]TechInfoDepot[/url], [url="https://wikidevi.wi-cat.ru/D-Link_DIR-885L_rev_A1"]Wi-Cat[/url], [url="https://deviwiki.com/wiki/D-Link_DIR-885L_rev_A1"]DeviWiki[/url] **Immagini** FCC: [url="https://fcc.io/KA2/IR885LA1"]GOV[/url], [url="https://fccid.io/KA2IR885LA1"]ID[/url], [url="https://fcc.report/FCC-ID/KA2IR885LA1"]Report[/url] [url="https://www.hkepc.com/15043/%E7%B4%85%E8%9F%B9%E6%9B%B4%E8%A6%AA%E6%B0%91_D-Link__DIR-885L_%E6%97%97%E8%89%A6%E7%B4%9A%E8%B7%AF%E7%94%B1%E8%B7%AF"]HKEPC[/url] **Video** Cerca con: [url="https://www.google.it/search?q=dir-885l&tbm=vid"]Google[/url], [url="https://www.bing.com/videos/search?q=dir-885l"]Bing[/url], [url="https://www.qwant.com/?l=it&q=%22dir-885l%22&t=videos"]Qwant[/url] [color=red]**Firmware alternativi**[/color] **DD-WRT** [url="https://dd-wrt.com/support/router-database/"]Router Database[/url] [url="https://dd-wrt.com/support/other-downloads/?path=betas%2F"]Repositorio[/url] [url="http://www.dd-wrt.com/wiki/index.php/Supported_Devices#D-Link"]Supportato dalla versione *27944 20151009*[/url] [url="http://www.dd-wrt.com/phpBB2/viewforum.php?f=1"]Sezione Broadcom del forum English[/url] **OpenWrt** [url="https://firmware-selector.openwrt.org/"]Selettore firmware[/url] [url="https://downloads.openwrt.org/"]Repositorio[/url] [url="https://openwrt.org/toh/d-link/dir-885l"]Tavola dispositivo[/url] supportato dalla versione *17.01.0 20170221* [url="https://www.google.it/search?q=site%3Aforum.openwrt.org+dir-885l"]Cerca con Google "dir-885l" sul forum OpenWrt[/url] [url="https://klseet.com/networking/router-firmware/lede/d-link-dir-885l-lede-openwrt"]K.L. Seet: info aggiornamento A1[/url] [url="https://klseet.com/networking/router-firmware/lede/d-link-dir-885l-hw-ver-a2-lede-openwrt-wifi-fix"]K.L. Seet: info aggiornamento A2[/url]

Pubblicato firmware *DIR-885L Ax 1.13 build 03 20161129*. [code] DIR-885L Release Note Firmware: 1.13b03 Hardware Revision: Ax Date: 2016/11/29 Enchancement: 1. In compliance with ErP Lot 26 2017/01/01 --------------------------- Firmware: 1.12b05 Hardware Revision: A Date: 2016/10/25 Changes: 1. Fixed RU PPPoE incorrect idle time. 2. Fixed WPS-PIN lock error. 3. Fixed USB 3.0 dongle IOT. 4. Fixed IE11 display issue. 5. Fixed time format. 6. Fixed incorrect unit in QoS. 7. Fixed suspect list (mydlink). 8. Fixed port confliction behavior in Virtual Server. 9. Fix HNAP Service Stack-Based Buffer Overflow Vulnerability CWE-121 CVE-2016-6563 VU#677427 http://www.kb.cert.org/vuls/id/677427 Enchancement: 1. Support VLAN and KR IPTV. 2. Support iQoS (QoS by application type). 3. Improved Wi-Fi stability. --------------------------- Firmware: 1.11b07 Hardware Revision: A2 Date: 2016/05/05 Changes: 1. Fixed it was possible for Website Filter not working in some environment. 2. Fixed it was possible to show incorrect status of USB 3.0 LED. 3. Fixed it was possible to enable Guest Zone unexpectedly. 4. Fixed UI errors. 5. Correct behavior of Auto Reboot. Enchancement: 1. Support MU-MIMO (beta stage). 2. Support Wireless Bridge mode. --------------------------- Firmware: 1.02b01 Hardware Revision: A2 Date: 2016/01/19 Changes: 1. Fixed Virtual Server and Port Forwarding abnormal behaviors. Enchancement: 1. Improve USB performance. Note: 1. Update KR power table. 2. Update AU power table. --------------------------- Firmware: 1.00b20 Hardware Revision: A1 Date: 2015/10/22 Note: 1st Release. --------------------------- [/code]

Pubblicato firmware *DIR-885L Ax 1.20 build 02 20170928*. N.B. Per le versioni precedenti fino alla 1.13 del 2016 occorre aggiornare prima alla versione di transizione *DIR885LA1_FW115b02.bin* [20170928] contenuta nel pacchetto. [code] DIR-885L Firmware Release Notes Firmware: FW v1.20b02 Hardware: Rev. A1 Release Date: 2017/10/3 Note: 1. The firmware version is advanced to v1.20 2. The firmware v1.20b02 must be upgraded from the transitional version of firmware v1.15b02. Problems Resolved: 1. Fixed the security issues reported by Embedi.com on Sep 12th ,2017. Issue 1) Command Injection in http://192.168.0.1/getcfg.php Issue 2) Stack overflow HNAP in http://192.168.0.1/HNAP1/ Issue 3) Command Injection for “EXEC REBOOT SYSTEM” command for service jcpd. [/code] --- Note edizione firmware intermedio *DIR-885L Ax 1.15 build 02 20170928* [code] DIR-885L Firmware Release Notes Firmware: FW v1.15b02 Hardware: Rev. A1 Release Date: 2017/10/3 Note: 1. The firmware v1.15b02 is the transitional version for upgrading to v1.20b02 or later version. 2. Below is the procedure for firmware upgrade: • Connect to the router via LAN port or WIRELESS interface. • Log in to the D-Link management page (http://192.168.0.1 or http://dlinkrouter.local./) • Go to the firmware upgrade page, upload the firmware v1.15b02 and wait for the device to reboot. • Log in to the D-Link management page again. • Go to the firmware upgrade page and check the button of online firmware check and download the firmware v1.20b02 or later version. • Upload the firmware v1.20b02 • Wait for the device to reboot and don’t power off the router during the firmware upgrade. • The router is fully upgraded. For the detailed information, please refer to the firmware release note of v1.20b02. [/code]

Pubblicato firmware *DIR-885L Ax 1.21 build 03*. P.S. Purtroppo non sappiamo se le ricompilazioni con data successiva siano inclusive delle correzioni (patch) precedenti. --- ***20190312 ME*** - L2TP_FQDN64_0312(0313180052) [code] Versione firmware corrente: 1.21, Tue 12 Mar 2019 Data firmware corrente: 2019-03-12 15:56:00 [/code] --- ***20180807 DE*** - v6-MSS-i87c [code] DIR-885L Rev.A Release Note Firmware: FW v1.21b03-v6-MSS-i87c Release Date: 2018/08/07 Problems Resolved: 1. Fix IPv6 issue. 2. Fix Guest WLAN issue. [/code] --- ***20180119 US*** - BETA *DIR885LA1_FW121b03.bin* 20180209 19:39 21,6 MB/22.161 KB/22.692.032 byte [code] DIR-885L Firmware Patch Notes Firmware: 1.21B03 BETA Hardware: Ax Date: August 9, 2018 Note: This release is to patch the WPA2 Key Reinstallation Attack (KRACK) Security Vulnerabilities affecting this product. Problems Resolved: A WPA2 wireless protocol vulnerability was reported to CERT//CC and public disclosed as: VU#228519 - Wi-Fi Protected Access II (WPA2) handshake traffic can be manipulated to induce nonce and session key reuse. The following CVE IDs have been assigned to VU#228519. These vulnerabilities in the WPA2 protocol: • CVE-2017-13077: reinstallation of the pairwise key in the Four-way handshake • CVE-2017-13078: reinstallation of the group key in the Four-way handshake • CVE-2017-13079: reinstallation of the integrity group key in the Four-wayhandshake • CVE-2017-13080: reinstallation of the group key in the Group Key handshake • CVE-2017-13081: reinstallation of the integrity group key in the Group Keyhandshake • CVE-2017-13082: accepting a retransmitted Fast BSS Transition Re-associationRequest and reinstalling the pairwise key while processing it • CVE-2017-13084: reinstallation of the STK key in the PeerKey handshake • CVE-2017-13086: reinstallation of the Tunneled Direct-Link Setup (TDLS)PeerKey (TPK) key in the TDLS handshake • CVE-2017-13087: reinstallation of the group key (GTK) when processing aWireless Network Management (WNM) Sleep Mode Response frame • CVE-2017-13088: reinstallation of the integrity group key (IGTK) whenprocessing a Wireless Network Management (WNM) Sleep Mode Responseframe Enhancements: None Known Issues: None [/code]

Dal sito .it risulta già obsoleto cioè non più in vendita ma ancora supportato. Su [url="https://amzn.to/39pvvMV"]Amazon.it[/url] infatti è disponibile solo da venditori terzi. Certo che se si potesse avere in outlet intorno ai 100 sarebbe molto meglio. Qualcuno lo ha già provato con i firmware open source?

Nel 2° messaggio ci sono tutti i riferimenti utili per i due firmware a sorgente aperta compresi i collegamenti ai rispettivi repositori. Avevo già individuato anche la pagina di un malese, con rispettivi video, che mostra l'aggiornamento e la configurazione di OpenWrt su questo modello. I firmware del marchio sono orientati ad un utente medio mentre quelli alternativi sono orientati ad un utente avanzato con molte più opzioni configurabili manualmente. DD-WRT ha tutto incorporato mentre OpenWrt installa il sistema di base poi è possibile caricare numerosi pacchetti aggiuntivi con ulteriori strumenti di personalizzazione. Notoriamente Broadcom (Avago) non ha mai distribuito i sorgenti dei driver ADSL come non l'ha fatto per quelli wireless, tuttavia le ultime versioni OpenWrt funzionano. DD-WRT sembra invece avere accesso a questi driver, tanto è vero che per i modelli di punta (DIR-885L/890L/895L) ha anche dei firmware con driver sperimentale con numerose ulteriori opzioni di configurazione manuale. Misurati con una DWA-182 A1 (Broadcom) su 2,4 GHz effettivamente il DD-WRT sembra avere 5 tacche su 5 di qualità del segnale a 300 Mbps invece OpenWrt scende ad 1 tacca e 150 mentre il fw D-Link ha un paio di tacche e 300 sulla distanza di 10 m con un paio di muri dalla sorgente. L'OpenWrt è appetibile per la non comune gestione avanzata dei LED da interfaccia di configurazione mentre il DD-WRT pecca da morire tanto che anche a frequenza spenta i rispettivi LED di funzionamento restano accesi.

Molto interessante, non avevo notato il secondo messaggio. > @"Pondera"#p47055 > OpenWrt è appetibile per la non comune gestione avanzata dei LED da interfaccia di configurazione Ti permette di personalizzare qualsiasi cosa, dalla versione 19.07.xx inoltre i pacchetti software saranno indipendenti dalla versione del firmware e si aggiorneranno, volendo anche in automatico, senza dover cambiare il firmware. > @"Pondera"#p47055 > OpenWrt scende ad 1 tacca e 150 Quale versione hai provato? Arrivi a 300 Mbps solo se "forzi" i 40 MHz (impostazioni avanzate).

> @"m4ss1"#p47057 > Quale versione hai provato? L'ultima stabile 18.06.5 del 10 Nov 2019. > @"m4ss1"#p47057 > Arrivi a 300 Mbps solo se "forzi" i 40 MHz (impostazioni avanzate). E già!

> @"m4ss1"#p47057 > Arrivi a 300 Mbps solo se "forzi" i 40 MHz (impostazioni avanzate). Purtroppo nemmeno in questo modo...

Pubblicato firmware *DIR-885L Ax 1.21 build 03 neo 20191127*. N.B. Per le versioni precedenti inferiori alla 1.20 del 2017 (fino alla 1.13 del 2016) occorre aggiornare prima alla versione di transizione *1_DIR-885L_RevA_MiddleFirmware121b03.bin* [20191127] contenuta nel pacchetto. [code] DIR-885L Rev.A Release Note Firmware: 1.21b03neo Release Date: 2019/11/27 Problems Resolved: 1. Fix security issue CVE-2019-17621: Unauthenticated remote command execution 2. Fix security issue CVE-2019-20213: Information Disclosure LAN-side security vulnerability ---------- Firmware: FW v1.21b03-v6-MSS-i87c Release Date: 2018/08/07 Problems Resolved: 1. Fix IPv6 issue. 2. Fix Guest WLAN issue. ---------- Firmware: FW v1.20b02 Release Date: 2017/10/3 Note: 1. The firmware version is advanced to v1.20 2. The firmware v1.20b02 must be upgraded from the transitional version of firmware v1.15b02. Problems Resolved: 1. Fixed the security issues reported by Embedi.com on Sep 12th ,2017. Issue 1: Command Injection in http://192.168.0.1/getcfg.php Issue 2: Stack overflow HNAP in http://192.168.0.1/HNAP1/ Issue 3: Command Injection for “EXEC REBOOT SYSTEM” command for service jcpd. ---------- Firmware: FW v1.15b02 Release Date: 2017/10/3 Note: 1. The firmware v1.15b02 is the transitional version for upgrading to v1.20b02 or later version. ---------- Firmware: 1.13b03 Date: 2016/11/29 Enchancement: 1. In compliance with ErP Lot 26 2017/01/01 ---------- Firmware: 1.12b05 Date: 2016/10/25 Changes: 1. Fixed RU PPPoE incorrect idle time. 2. Fixed WPS-PIN lock error. 3. Fixed USB 3.0 dongle IOT. 4. Fixed IE11 display issue. 5. Fixed time format. 6. Fixed incorrect unit in QoS. 7. Fixed suspect list (mydlink). 8. Fixed port confliction behavior in Virtual Server. 9. Fix HNAP Service Stack-Based Buffer Overflow Vulnerability CWE-121 CVE-2016-6563 VU#677427 http://www.kb.cert.org/vuls/id/677427 Enchancement: 1. Support VLAN and KR IPTV. 2. Support iQoS (QoS by application type). 3. Improved Wi-Fi stability. ---------- Firmware: 1.11b07 Date: 2016/05/05 Changes: 1. Fixed it was possible for Website Filter not working in some environment. 2. Fixed it was possible to show incorrect status of USB 3.0 LED. 3. Fixed it was possible to enable Guest Zone unexpectedly. 4. Fixed UI errors. 5. Correct behavior of Auto Reboot. Enchancement: 1. Support MU-MIMO (beta stage). 2. Support Wireless Bridge mode. ---------- Firmware: 1.02b01 Date: 2016/01/19 Changes: 1. Fixed Virtual Server and Port Forwarding abnormal behaviors. Enchancement: 1. Improve USB performance. Note: 1. Update KR power table. 2. Update AU power table. ---------- Firmware: 1.00b20 Date: 2015/10/22 Note: 1st Release. ---------- [/code] [code] Anleitung zur Installation der Firmware Für DIR-885L Rev.A Zur Installation der Firmware gehen Sie bitte wie folgt vor. 1. Greifen Sie per Webbrowser auf die Konfiguration Ihres DIR-885L zu. Die Standard Adresse ist http://192.168.0.1 Generell ist der der Aufruf mit http://dlinkrouter oder http://dlinkrouter.local möglich. (außer Sie haben den Netzwerknamen dlinkrouter Ihres DIR-885L geändert) 2. Wurde Ihr DIR-885L noch nicht konfiguriert, befindet sich also im Auslieferungszustand, wird der Setup-Assistent angezeigt. Andernfalls weiter bei Punkt 3 auf der nächsten Seite. Wählen Sie ggf. unten im Aufklappmenü Deutsch aus und klicken oben-rechts auf X. Weiter bei Punkt 4. 3. Wurde Ihr DIR-885L bereits zuvor konfiguriert oder der Setup-Assistent zuvor schon mal abgebrochen, erscheint das Anmelde-Fenster. Standardmäßig ist auf der Konfiguration kein Kennwort gesetzt. Wählen Sie oben-rechts im Aufklappmenü Deutsch aus, wenn die Konfigurationsoberfläche noch nicht in Deutsch angezeigt wird, und klicken auf Anmelden. Hinweis: Haben Sie bereits ein Admin-Kennwort konfiguriert, geben Sie dieses an. Kennen Sie das vergebene Admin-Kennwort nicht mehr, müssen Sie den DIR-885L auf Werkseinstellungen zurücksetzen (Factory Reset). Halten Sie dazu den Resettaster mit der Aufschrift RESET auf der Rückseite des eingeschalteten DIR-885L mit z.B. einer Büroklammer oder einer Nadel für 5-10 Sekunden gedrückt. 4. Wählen Sie oben das Menü Verwaltung und dann im sich öffnenden Menü Upgrade aus. Ist in Ihrem DIR-885L noch eine Firmware kleiner als 1.20 installiert, fahren Sie bei Punkt 5 fort. Ist bereits die Firmware 1.20 oder höher installiert, dann weiter bei Punkt 11. 5. Unten klicken Sie unten bei Manuelles Upgrade auf den Knopf Datei wählen. Wählen Sie die zuvor entpackte „Middle-Firmwaredatei "1_DIR-885L_RevA_MiddleFirmware121b03.bin" aus und klicken auf Hochladen. 6. Klicken Sie auf OK. 7. Die Firmware wird nun installiert. Dies dauert etwa 4 Minuten. 8. Klicken Sie auf OK. 9. Nachdem die „Middle“-Firmware installiert ist, loggen Sie sich wieder in die Konfiguration ein. Wählen Sie oben-rechts im Aufklappmenü Deutsch aus, wenn die Konfigurationsoberfläche noch nicht in Deutsch angezeigt wird, und klicken auf Anmelden. Hinweis: Haben Sie bereits ein Admin-Kennwort konfiguriert, geben Sie dieses bei Password an. 10. Wählen Sie oben das Menü Verwaltung und dann im sich öffnenden Menü Upgrade aus. 11. Unten klicken Sie unten bei Manuelles Upgrade auf den Knopf Datei wählen. Wählen Sie die zuvor entpackte Firmwaredatei "2_DIR-885L_RevA_Firmware121b03neo.bin" aus und klicken auf Hochladen. 12. Klicken Sie auf OK. 13. Die Firmware wird nun installiert. Dies dauert etwa 4 Minuten. 14. Klicken Sie auf OK. Die Installation der Firmware ist damit abgeschlossen. Empfehlung: Factory Reset Es kann vorkommen, dass sich Bugs (Fehlfunktionen) mit der bestehenden Konfiguration von der alten Firmware in die neue Firmware einschleppen. Oder Bugs auftreten, welche die neue Firmware gar nicht hat, da die alte Konfiguration in manchen Punkten mit der neuen Firmware nicht zusammenpasst. Daher empfehlen wir abschließend einen Factory Reset mit anschließender Neueinrichtung des Routers. Möglichkeit 1: Über den Reset-Knopf Ihres DIR-885L: Halten Sie dazu den Resettaster mit der Aufschrift RESET, auf der Rückseite des eingeschalteten DIR-885L mit z.B. einer Büroklammer oder einer Nadel für 5-10 Sekunden gedrückt. Installieren Sie bitte keine Konfigurationsdatei einer anderen, älteren Firmwareversion in Ihren DIR-885L. Möglichkeit 2: Über die Konfigurationsoberfläche Ihres DIR-885L: Wählen Sie oben das Menü Verwaltung und dann im sich öffnenden Menü Systemverwaltung aus. Klicken Sie auf System. Bei Auf Werkseinstellungen wiederherstellen klicken Sie auf Wiederherstellen. Klicken Sie auf OK. Ihr DIR-885L startet nun neu. Der Factory Reset ist damit abgeschlossen. Installieren Sie bitte keine Konfigurationsdatei einer anderen, älteren Firmwareversion in Ihren DIR-885L. Um die genaue Versionsnummer der im DIR-885L installierten Firmware auszulesen, loggen Sie sich in die Konfiguration Ihres DIR-885L ein. In der Adresszeile dieses Browser-Fensters rufen Sie dann http://192.168.0.1/version.txt oder http://dlinkrouter/version.txt oder http://dlinkrouter.local/version.txt auf. [/code] [code] Please note that in order to upgrade the firmware to v1.21b03neo, you must first upgrade to the transitional firmware (middle firmware) v1.21b03. Both firmwares are included in the download file. 1. Connect to the router via LAN port or Wi-Fi. 2. Log into the DIR-885L web-based management page (http://192.168.0.1 or http://dlinkrouter.local./). 3. Go to the firmware upgrade page, upgrade the firmware with the file "1_DIR-885L_RevA_MiddleFirmware121b03.bin" that is included in the firmware zipped file. Wait for the device to reboot. 4. Log back into the DIR-885L web-based management page again. 5. Go to the firmware upgrade page again and this time upgrade the firmware with the file "2_DIR-885L_RevA_Firmware121b03neo.bin" that is included in the firmware zipped file. 6. Wait for the device to reboot and don’t power off the router during the firmware upgrade. 7. The router firmware is now upgraded. For the detailed information, please refer to the firmware changes. [/code] --- ***20191127 CA*** *DIR885LA1_FW121b03_commandinjection_bufferoverflow_1209.bin* 20191216 10:27 21,5 MB/22.089 KB/22.618.304 byte [code] issue: gena cgi command injection web file access services.c buffer overflow ref: svn 84084, 84413 [/code] --- ***20191127 US*** *DIR885LA1_FW121b03_STEP_02.bin* 20191216 10:27 21,5 MB/22.089 KB/22.618.304 byte [code] DIR-885L Firmware Release Notes Firmware: 1.21B03 Hotfix Hardware: Ax Date: August 26, 2020 Problems Resolved: 1.Unauthenticated RCE (LAN-Side) via UPNP a.CVE-2019-20215 b.CVE-2019-20216 c.CVE-2019-20217 2.Unathenticated remote command execution on the LAN-Side a.CVE-2019-17621 b.CVE-2019-20213 3rd Party Report: - Miguel Mendez Z. — (s1kr10s) - Research Center at Telefónica Chile - Pablo Pollanco — (secenv) - Research Center at Telefónica Chile [/code]

Caricamento...

Qualcosa è andato storto durante il tentativo di caricare la versione completa di questo sito.

DIR-885L: Router Wi-Fi Ultra MU-MIMO AC 3150

« Pagina precedente