ATTENZIONE: nuovo firmware DSL-2770L vers. EU 1.02B01 del 15.04.2014 disponibile per il download nel primo post.
Changelog:
1.Fixed: DBG14040232, Scan some ports have opend.
2.Fixed: DBG14040233, DUT will repsond DNS request packets from remote pc.
1.Fixed: Flash over-used
1.Fixed: Config area over-used.
1.Fixed:Quick fix for FW upg error 150
1.Fixed: When WPS button time out or associated a client,and the blue light stops blinking.The green power led continues to blink forever, unless he manually reboots the router.
1.Add: Add ADSL PPPoE dial on demand.
2.Fixed: mydlink show "Cannot login to mydlink" when WAN don't connect to internet.
"1.Fixed: When Web HDD upload files, UI show ""firmware upgrade"".
DBG13090371"
1.Fixed: WiFi connective issue
2.Fixed: DBG13090371
3.Fixed: DBG13090380
4.Fixed: DBG13090392
5.Fixed: DBG13090381
"Fixed : Annex M upload throughput issue
Upload throughput amended from 0.11MBps to 0.22MBps(Byte)"
"Fixed: When you go through the wizard and choose ""best"" encryption, and click next it defaults to TKIP which is for WPA1 not WPA2 as
was indicated by the ""best"" selection."
1. Fixed: Port forwarding of port 80 is now accepted in the GUI, but it does not work unless i manually turn off SPI.
2. Fixed: The predefined password when enabling WPA is still 1234567890 Excpected behaviour is blank so that the customerhas to write in his own password.
"3. Fixed: WPS no longer produces the ""Check the display of your router"" window. But i still cannot get it to work. It never presents
The ""Push button on route""r screen, it only prompts me to type in my password."
"4. Fixed: When you go through the wizard and choose ""best"" encryption, and click next it defaults to TKIP which is for WPA1 not WPA2 as
was indicated by the ""best"" selection."
"5. Fixed: If you want to allow access to shareport mobile you have to disable SPI according to the GUI. In our other models this is not necessary,
Please turn it off by default."
"1. Fixed: You cannot do a port forward of port 80. Using the predefined rule for http server will give you an error stating that port 8080 will be used instead. That is ok, but what it actually does is change the port of my port forward rule to 8080 instead.
So this means that I cannot make a port forward rule of a http server even though it is one of the preset choices in the device. The expected behaviour is for the device to change the port of the remote management not the port forward rule."
"2. Fixed: There is no option to choose AnnexM. And auto detect does not sync up in AnnexM automatically either.
Is AnnexM even supported by this device, it has been standard in I think all of our DSL devices ever since DSL-320T"
"3. Fixed: Group key interval on the WPA encryption defaults to 0sec.
My PC seemed to have no problems connecting, but my iPhone refused. When I set it manually from 0sec to 60sec it worked for the iPhone as well."
4. Fixed: Win 8 logo testing
1. Add : Wireless wizard add the 64 or 128 bit option for WEP security setting.
2. Fixed: Disk format distribution displayed error.
3. Fixed: NAS Web HDD download function failed.
4. Fixed: Shareport Web access could not create the folder.
5. Fixed: Shareport Web access link is different from LAN IP address(IE browser).
6. Fixed: Budget Quota traffic info. has two Received traffic .(text modification)
7. Fixed: Password CAPTCHA function failed.
8. Fixed: Help : Status : Connected client failed
9. Fixed: Help:Maintenacne、Status UI failed on IE browser.
1. Fixed: Mydlink 5376 It spends much time for ADSL connection.
2. Add: Mydlink 5243 new FW available function.
1. Fixed: Mydlink 5378 enable remote web access and select 88, 1080,8080 port, can't connect web gui
2. Fixed: Mydlink 5381 android mydlink lite test notification email send fail
3. Fixed: Mydlink 5484 cannot sign-in to mydlink when binding to a new account that password has ascii symbol
4. Fixed: Mydlink 5480 when using ascii code symbol for ssid, it would not shown correctly
5. Fixed: Mydlink 5490 in mydlink portal, cannot enter router status page after blocking device via mydlink lite
6. Fixed: Mydlink 5492 cannot unblock device in mydlink lite fixed
7. Fixed: Mydlink 5493 cannot binding to an old account that password has ascii symbol
8. Fixed: Mydlink 5479 can apply invalid wi-fi password without any error message
9. Fixed: Mydlink 5472 cannot send the test notification e-mail(support 126.com和163.com)
10.Fixed in new ios app: 5247 ios mydlink lite can't login dsl-2770 is will show "connection time out"
11. The duty of mydlink team: 5481 in notification, the e-mail address is not registered e-mail
12. The duty of mydlink team: 5489 in mydlink lite, cannot change the wi-fi security mode and password app
1. Fixed:[DSL-2770L fw DSL-2770L_A1_EU_1.00_03012013]enable remote web access and select 88,1080,8080 port, can't connect web gui
1. Fixed:My dlink:When block device the connection list, it will show another unknown device.
2. Change the behaviour of this to only show a small message below the enable radio button.
3. Fixed:Showing wrong Product Model Name DIR-506L when logging in to the SharePort Web Access feature.
1. Add Bandwidth option for 20 or 40 Mhz channel width.
2. Remove the behavior of USB unmount on WPS button.
3. Fixed issue :Multiple USB Storage devices shown but only the most recently connected is accessible.
"4. [Setup] > [USB Services] > [Access Control] > [User Configuration] – User Access
Fixed: Cannot Delete any configured Users
Fixed:All User IDs are Selected and cannot be individually selected.
Fixed:FTP access uses the latest User ID eg. ID 1 & 2 configured but FTP only allow using ID 2 login details."
"5.[Setup] > [SharePort mobile]
Pop-up message to remind users. (If you want to use shareport mobile, please disable SPI)
Fixed:Unable to show the attached USB storage info in [NUMBER OF DEVICES] section"
"6.SharePort Mobile
Fixed:Duplicated USB devices shown under Folder view but there is only one USB storage device connected."
"7. Mydlink:
Fixed:Change security mode WPA/WPA2 to WEP can't change success.
Fixed:Android mydlink lite test notification email send fail.
Fixed:Enable remote web access and select 88,1080,8080 port, can't connect web gui."
8. Fixed: Shareport printer K-code issue.
1. Fix mydlink pages format and missing values for mydlink lite app
1. mydlink Portal: wireless client can't connect when WEP mode.
1. The default WPS config status should be unconfigured not configured
2. (for DCC)Set up PPPOA throuth DCC tool, it will pop up a error message, then can not to save configuration.
3. (for DCC)After setup wan type(PPPOE,static,dynamic), configure and has not come into force , needing reboot will come into force.
4. mydlink Portal: Upload / Download speeds are not displayed.
5. mydlink Portal: WAN IP is shown as 0.0.0.0 when using a PPP connection, but shows the WAN IP when using Ethernet WAN.
6. mydlink Portal: mydlink browsing history can't display in mydlink portal website.
1. Remote Management: fill in the Management IP with 0.0.0.0 so that it works without the end user needing to enter this.
2. UPnP AV/DLNA Server no longer working.
3. mydlink Portal: Upload / Download speeds are not displayed.
4. mydlink Portal: WAN IP is shown as 0.0.0.0 when using a PPP connection, but shows the WAN IP when using Ethernet WAN.
5. mydlink Portal: browsing history haven't show.
6. DCC issue: DBG13020078 Set up PPPOA throuth DCC tool, it will pop up a error message, then can not to save configuration.
7. DCC issue: DBG13020085 After setup wan type(PPPOE,static,dynamic), configure and has not come into force , needing reboot will come into force.
fix status page pull down show two wan type at the same time.
1. There is an issue with the Internet Online Status icon on the Status > Device Info page, it never changes to online and always remains in the Offline state.
2. If you run through the Setup Wizard and leave the wireless settings on their default values of WPA2 using TKIP and a passphrase of “1234567890” it will complete the Setup Wizard fine but the Wireless is never secured, it just remains unsecured until you go an change the passphrase to something different, also if you run this setup wizard under IE10 in Windows 8 when it gets to step 6 and if you leave WPA2 selected and don’t change anything on this page the Passphrase field is not displayed on the next step
3. The mydlink registration is not working.
4. Wireless clients are not being displayed in the LAN DHCP clients listing under LAN Setup.--->test ok in our side.
5. SharePort tool Test ok with SharePort\PC\1.23+ SharePort\Mac\1.16+
6. SharePort Mobile app works via iOS 6.0.2.Test ok with iphone 5 .
7. USB > Download Assistant does not show completed jobs.--->new feature,not add.
8. USB > Web HDD does not warn you before overwriting an existing file.--->new feature,not add.
9. Port Forwarding is not working.--->fix the priority higher then SPI.
10. DMZ is not working.--->fix the priority higher then SPI.
11. Remote Management is not working, no matter what port I select it never gets opened.--->fix the priority higher then SPI.
12. Dynamic DNS needs the device to reboot before you can access the DDNS domain, although the popup says it will be active immediately.--->tested ok in our side.
1. Advanced > Advanced Wireless – Guest Wireless Network should be disabled by default, even though it says enabled it is not actually enabled. Think the Checkbox may be incorrectly ticked.
2. Advanced > parental control – Rename from “parental control” to “Parental Control” and also add some help text and a small description of what can be done, e.g. Website Filtering.
"3. Setup Wizard (ADSL)
a. Step 3 – Data Encapsulation is not required as it should gather this information from the Country and ISP details.
b. Step 3 – Australian and New Zealand ISPs are not listed, please use the attached listing or the one used on the DCC.
c. Step 5 – Wireless Security should be defaulted to WPA2 to ensure the customer’s network is secured.
1.fix typo in adsl wizard.
2. Setup > WAN – The Data Encapsulation feature should be moved down and placed below VCI Number, it should also change when an ISP that uses VCMux is selected.
3. There is a typo on the Time & Date page, please change from DTS to DST.
4. Maintenance > Firmware Update – Link to Save/Restore page gives a 404 error.Tries to load this URL: http://192.168.1.1/system.html
1.fix mydlink can't register to EU area.
1. Updated ISP list from EU regions.
2. The Country and ISP selection should be asked first.
3. Change the “MYDLINK” text to “mydlinkTM Cloud Services”.
4. Time > Time & Date – Show the NTP server:ntp1.dlink.com configured by default in the NTP Server used field.
5. Advanced – Change “VIRTUAL SERVER” to “Virtual Server”.
6. Advanced – Rename “Advanced Internet” to “Advanced ADSL”.
7. Advanced > Advanced Wireless – Disable Guest Wireless Network by default, it doesn’t appear to be visible but the radio button is checked for enable.
8. Add Advanced > Parental Controls – URL Filter
9. Fix SharePort Web Access is not working
1.Fix UI-->Wizard step 8 description
2.default time zone:+0
1.SharePort Web Access Link – Only works after disable SPI Firewall option
2.When accessing the Web UI for the first time it will take you to the Status page
3.Wireless Settings missing from Setup Wizard
4.NTP/Time settings are not saved correctly
5.Multicast: Enable this by default.-->Auto
6.IGMP Snooping: Enable this by default.-->standard mode
7.MTU – Set to 1492 by default
8.Remove Connection Control
9.SETUP > Time and Date > TIME CONFIGURATION
10.correct the Day of Week by replacing Dec with Sun
11.QOS priority is unable to work
12.add D-link DDNS
1.The auto-shift function does not in force after set remote managment and port forwarding
2.It's unable to hear audio with SIP-ALG
3.Client is unable to establish connection with WPA/WPA2-EAP-PEAP
4.The frequency is very high that the device breaks
UI part:
1.String error in ADVANCED-->Advanced Internet
2.String error in ADVANCED-->Budget Quota
3. SETUP > Internet Setup > ADSL, the button at the top now says ADSL Interface instead of Setup Wizard.
4.MAINTENANCE > Session Idle Time out limit 0~ 9999
5. change the Admin password of the device due to a bug on the GUI
6. create NATP rules using the same port
7.guest SSID: D-Link DSL-2770L_Guest
1.support 4 languages:French Spanish Italian German
2.wizard revise “SETUP COMPLETE!” => “INTERNET CONNECTION ESTABLISHED”
3.The Internet Connection Setup Wizard has completed. Click the Connect button to save your settings. => The Internet Connection had been established. If you want to register mydlink account right now, please Click Next. Or you can click “Connect” to skip and setup it later.
4.Default Username and Password to access UI must be admin/admin.
5.Ethernet WAN – Add help message on GUI showing LAN 4 could be assign as EtherWAN port. : LAN4 could be assigned as Ethernet WAN if you enable Ethernet Interface to configure Internet access
6.ADSL Setup – Enable PVC0 when setting up an ADSL connection by default.
7.Add a country selection to the Manual ADSL setup and also Step 3 of the Setup Wizard like.
8.In the Setup Wizard default the Time Zone to local.
9.Setup > NAS – Rename to Setup > USB Services.
10.Setup > NAS.>DOWNLOAD ASSISTANT>E-mail Alert Configuration>remove BT,emule
11.Setup > NAS – Remove the word “go” from all of the buttons.
12.Setup > NAS > File Sharing – Change computer name to “DSL-2770L”.
13.Setup > NAS > iTunes Server – Password should be visible or you need to alert the user that the password is the same as the router UI password.
14.SharePort does not work.Work with new FW
15.Setup > Storage – Rename to SharePort mobile.
16.Setup > MYDLINK SETTINGS – Rename to mydlink Settings, so that it is not in all CAPS.
17.Advanced > Firewall & DMZ – enable SPI by default.
18.The Helpful Hints and main help section are missing large amounts of information.
19.copy right 2012-2014
20.Advanced > Port Mapping – Ports are incorrectly named.
21.DSL led doesn't indicate Solid Green, it's flashing.
22.add Bridge Mode/IGMP V2/V3 Snooping Standard Mode
23.Any none DSL-2770L's firmware can upgrade.
24.upnp'D-Link model_name' is wrong, it need like 'D-Link DSL-2770L'
25.DUT internal Web Server Auto-Shift to Port 8080
26.It's unable to hear audio with SIP-ALG when SIP server RIP proxy is disable.
